Quick Start Guide - nedis FSHP250AT Guide De Démarrage Rapide

a

Quick start guide

Bluetooth Headphones
For more information see the extended
manual online: ned.is/fshp250at
Intended use
The Nedis FSHP250AT are Bluetooth headphones which will
make you enjoy music at anytime and anywhere. It connects with
different kinds of audio systems, such as your tablet PCs, mobile
phones, digital music players and other wide range of audio-visual
products.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Parts list [Image A]
1
Next song / Volume up
2
Power / play / pause
3
Previous song / Volume
down
Safety instructions
- WARNING
•
Only use the product as described in this manual.
• Do not expose the product to water or moisture.
• Please turn off the headphones and put it into the original box
to avoid damage, scratches or bracket deformation, when not
used for a long time. In order to prolong the battery service life,
please charge every 6 months.
•
Please first charge the headphones when unused for a long
time.
• The battery of the headphones is original, do not change by
yourself.
•
Keep the headphones in a dry place.
•
Operating temperature is 5
higher temperatures, to avoid a battery blast accident.
• Do not bent or twist the bracket to avoid deformation.
• Do not let the ear-cap be teared down by an unprofessional
person.
•
Listening on high volume for a long time will damage your
hearing.
• Audiologists advise not listening on a high volume. If tinnitus
occurs, turn the volume down or stop playing. Avoid a sudden
increase in volume.
•
Do not use the headphones in a (dangerous) place where you
cannot hear the surrounding sounds.
Charging the headphones
•
Connect the USB cable to
4
4
lights up red when charging.
4
4
turns blue when fully charged.
Switching on the headphones
2
• Press and hold for 3 seconds.
4
If the headphones are not paired within 5 minutes, they switch off.
FSHP250AT
4
Status indicator LED
5
Micro USB port
6
Audio port (3.5mm)
7
Microphone
C to 35 C. Do not expose to much
o o
5
.
Pairing the headphones to a Bluetooth audio
source
1. Switch on the headphones.
2. Enable Bluetooth on the device you want to pair the
headphones with.
4
4
blinks red and blue to indicate pairing mode is active.
3. Select "FSHP250" from the list of available Bluetooth devices on
your device.
4
4
When paired, lights up blue.
4 If the headphones have been paired with another device before,
make sure that device is switched off.
4
If the headphones lose connection to the Bluetooth source,
they will automatically reconnect when back in range and
switched on.
Controlling the volume
1
1. Press and hold to increase the volume.
3
2. Press and hold to decrease the volume.
4
When the volume reaches to maximum, there is a warning tone.
Controlling the music
2
1. Press to play or pause the music
1
2. Press to skip to the next song.
3
3. Press to go back to the start of the song. Press again to go to
the previous song.
Making phone calls
1. To answer an incoming call, press
2. To reject an incoming call, press and hold
2
3. To end a call, press
4. To quickly redial the last called number, double press
Switching off the headphones
2
Press and hold for 3 seconds to switch off the headphones.
Specifications
Product
Headphone Type
Article number
Frequency range
Bluetooth® version
Maximum transmission
power
Battery capacity
Charging input power
Maximum Charging time
Maximum Playback Time
Maximum Standby Time
Driver unit
Impedance
Frequency response
4
2
.
2
for 2 seconds.
.
Bluetooth Headphones
On-ear headphones
FSHP250AT
2402 - 2480 MHz
5.0
4 dBm
3.7 / 250 mAh built-in Lithium
battery
5V / 500mA
Up to 2 hours
Up to 18 hours
Up to 250 hours
40 W mm
32 Ω
20 Hz - 20 KHz
2
.