Emglo Air-Mate AM782HC4V Guide D'utilisation page 8

All manuals and user guides at all-guides.com
• Equip area of operation with a
fire extinguisher.
• Do not op er ate machine with
missing, broken, or un au tho-
rized parts.
WARNING: RISK OF FALLING
WHAT CAN HAPPEN
• A portable compressor can • Always operate compressor
fall from a table, workbench in a stable secure position to
or roof causing damage to prevent accidental movement
the compressor and could of the unit. Never operate
result in serious injury or compressor on a roof or
death to the operator. other elevated position. Use
additional air hose to reach
high locations.
CAUTION: RISK FROM NOISE
WHAT CAN HAPPEN
• Under some conditions and • Always wear certified safety
duration of use, noise from
this product may contribute
to hearing loss.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
FEATURES (Fig. 1)
ON/OFF SWITCH
Place this switch (A) in the ON position to
provide automatic power to the pressure
switch and OFF to remove power at the
end of each use.
PRESSURE SWITCH
The pressure switch (J) automatically
starts the motor when the air tank pres-
HOW TO PREVENT IT
sure drops below the factory set cut-in
pressure. It stops the motor when the air tank pressure reaches the
factory set cut-out pressure.
PRESSURE RELEASE VALVE
The pressure release valve located on the side of the pressure
switch, is designed to automatically release compressed air from
the compressor head and the outlet tube when the air compres-
sor reaches cut-out pressure or is shut off. The pressure release
valve allows the motor to restart freely. When the motor stops
running, air will be heard escaping from this valve for a few sec-
onds. No air should be heard leaking when the motor is running
or after the unit reaches cut-out pressure.
HOW TO PREVENT IT
SAFETY VALVE
If the pressure switch does not shut off the air
equipment: ANSI S12.6
compressor at its cut-out pressure setting, the
(S3.19) hearing protection.
safety valve (G) will protect against high pressure
by popping out at its factory set pressure (slightly
higher than the pressure switch cut-out setting).
8
A
J
G