ELVA Rapid 54 Mode D'emploi page 9

2 Instructions
1 Put the lever into the upper position.
2 Put a cork in front of the chuck jaws (drawing).
3 Put a bottle on the plate and let it go up until the collar comes
into the mouthpiece (drawing).
4 Pull down the lever until the stop.
5 Let the lever go up slowly without releasing it.
2.1 Warnings
The handcorker must be stable on the floor.
During the carrying hold the lever to prevent any impacts.
Don't put fingers in the box where there are the chuck jaws during the
operations with the lever.
Don't try to cork a damaged bottle.
Avoid all manipulations that could injure someone.
Cork only wine bottles with standard-sized collars.
Wear gloves and safety glasses to protect yourself if a bottle bursts.
Given the different existent cork qualities on the market and taking into account other factors
inherent to the system, we cannot give guarantees as for the quality of the work undertaken;
each user has the duty to verify that the operation will be realized correctly.
ELVAmac SA
tél. +41 21 801 21 77
Route de Préverenges 10
fax +41 21 803 00 96
1026 Denges ; Switzerland
e-mail info@elvamac.ch www.elvamac.ch
page 9