4
Changing format parts
Format parts can be change to adapt the floor corker for different bottle neck dimensions.
4.1 Change cork compressor
• Place securing pin to hole A
• Open the front plate of the compressor
• Remove compressor
• Insert new compressor
• Push compressor into final position
with the second pin
(hole B below compressor head)
• Close the front plate
• Remove securing pin
4.2 Change mouth peace
• Unscrew mouthpiece with the two screws C
• Change the mouth piece
• Fix the two screws C for the mouth piece
ELVAmac SA
tél. +41 21 801 21 77
A
Route de Préverenges 10
fax +41 21 803 00 96
B
1026 Denges ; Switzerland
e-mail info@elvamac.ch www.elvamac.ch
page 11
C