What Is Included In The Box; Attaching The Stand; Remote Control - Blaupunkt DVB-C Série Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
• Do not expose batteries to high temperatures and do not place them on
locations where the temperature might increase quickly, e.g. near the
fi re or on the direct sunshine.
• Do not expose batteries to excessive radiant heat, do not throw them
into the fi re, do not disassemble them and do not try to recharge unre-
coverable batteries. They could leak out or explode.
» Never use diff erent batteries together or mix new and old ones.
» Dispose of batteries in an environmentally friendly way.
» Most of the EU countries regulate the disposal of batteries by law.
Disposal
• Do not dispose of this appliance as unsorted municipal
waste. Return it to a designated collection point for the
recycling of WEEE. By doing so, you will help to converse
resources and protect the environment. Contact your
retailer or local authorities for more information.
3D Safety Information
• If you watch the 3D imaging too closely or for a long period of time, it
may harm your eyesight.
• Watching the TV or playing video games that incorporate 3D imaging
with the 3D glasses for a long period of time can cause drowsiness,
headaches or fatigue to you and/or your eyes. If you have a headache, or
otherwise feel fatigued or drowsy, stop watching the TV and take a rest.
• Pregnant woman, seniors, persons with heart problems or persons who
experience frequent drowsiness should refrain from watching 3D TV.
• Some 3D imaging may cause you to duck or dodge the image displayed
in the video. Therefore, it is best if you do not watch 3D TV near fragile
objects or near any objects that can be knocked over easily.
• Please prevent children under the age of 5 from watching 3D TV as it
may aff ect their vision development.
Warning for photosensitization seizure:
• Some viewers may experience a seizure or epilepsy when exposed to
certain factors, including fl ashing lights or images in TV or video games.
If you or anybody from your family has a history of epilepsy or seizure,
please consult with your doctor before watching 3D TV. Also certain
symptoms can occur in unspecifi ed conditions without any previous
history. If you experience any of the following symptoms, immediately
stop watching the 3D imaging and consult a doctor: dizziness or light
headedness, visual transition or altered vision, visual or facial instability,
such as eye or muscle twitching, unconscious action, convulsion, loss of
conscience, confusion or disorientation, loss of directional sense, cramps,
or nausea. Parents should monitor their children, including teenagers,
for these symptoms as they may be more sensitive to the eff ects of
watching 3D TV.
Risk of photosensitization seizure can be reduced
with the following actions.
• Take frequent breaks from watching 3D TV.
• For those who have vision that is diff erent in each eye, they should
watch the TV after taking vision correction measures.
• Watch the TV so that your eyes are on the same level as the 3D screen
and refrain from sitting too closely to the TV.
• Do not watch the 3D imaging when tired or sick, and avoid watching the
3D imaging for a long period of time.
• Do not wear the 3D glasses for any other purpose than viewing 3D
imaging on a 3D TV.
• Some viewers may feel disoriented after watching 3D TV. Therefore, after
you watch 3D TV, take a moment to regain awareness of your situation
before moving.

What is included in the box

Supply of this TV includes following parts:
1x TV
1x Remote control
2x AAA batteries
1x User guide
1x Stand
1x Stand neck
1x RF cable
1x TV stand installation packet
3D glasses (optional)

Attaching the Stand

Please follow the instructions in the Stand installation
leafl et, located in the accessories bag.
Getting started - initial set up
1.
Using the RF cable supplied, connect the TV to the TV Aerial wall
socket. Connect the power cable to the Electrical outlet.
2.
Turn on the device with marked ON/OFF switch
3.
Insert the batteries supplied into the Remote control and press the
Standby button to power on the TV.
4.
You will now be welcomed with the initial set-up screen. If it does not
appear, on the remote control, please press [MENU] then 8-8-8-8 and
the menu will appear. Press OK on the remote control and tuning will
start.
As part of our continuing eff orts to reduce energy consumption, we
added a new Home Mode feature (appears on the fi rst installation
screen). This function helps reduce energy consumption up 15%
compared to other modes. The image brightness is reduced using
Home Mode. If this setting does not suit your environment, you can
choose from other modes (Note: the Store mode is the optimal default
mode, but consumes 15% more than the Home Mode).
Please select desired language, country and environment. Set LCN*
to ON if you want to arrange found channels by cable provider
preferences (only applies to DVB-C channels).
Press [OK] button to start the tuning process.
5.
In the next step select the type of digital broadcasting. You can choose
between DVB-T (terrestrial), DVB-C (cable) or DVB-S2(satellite). The
analog channel will be searched automatically, as most of the cable
network includes analog channels.
6.
Select DVB-C if your TV is connected to a cable TV network. Keep
all default settings as it is recommended .Then press [OK] to start
the search. If DVB-C channels are not found, contact your network
provider for the valid "Network ID". Then perform a new search. Press
the [MENU], select "Network ID" and enter the network ID. Start your
search by clicking [OK].
7.
Optional channel presets DVB-S2*: Select "Satellite" in the "Digital-
type" in the menu for the optional channel presets. Here you can
choose between the various satellites. Since selection completed, then
the channel list of the exact satellite will be available to be imported
into your TV system. This take several seconds. Confi rm with [OK]
button on the remote control, to start scanning.
If you are missing channels, the reason for this is likely to be signal
strength, you should consider connecting signal booster and re-
tuning the TV.

Remote control

STANDBY – Switch on TV when in standby or vice versa.
MUTE – Mute the sound or vice versa.
DTV– Switch to digital TV source.
RADIO - TV/RADIO – Switch to Digital and switch between TV and radio
in Digital mode.
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dvb-s2 sérieDvb-t

Table des Matières