Repeat Play/Shuffle Play - Pioneer X-HM76D Mode D'emploi

> Before Start > Part Names
a
b
c
d
e
18
> Install > Initial Setup
Playing MP3/WMA discs
1. Turn the unit on.
2. Press CD to change input to CD.
3. Press < on the main unit to open the disc tray.
4. Put the disc on the tray, then press < to close the tray.
5. When reading of the disc is complete, the numbers of
folders containing MP3/WMA files and track numbers are
displayed.
CD
0 If MP3/WMA files are stored in two or more folders,
each folder is automatically allocated a number.
6. To start play, press
f
select a folder to play, press
Play starts automatically when you select a folder.
0 Folders that do not contain music files this unit can
play are skipped.
0 A maximum of 255 folders can be read. This includes
g
folders that contain files this unit cannot play.

Repeat play/Shuffle play

1. Repeatedly press SHUFFLE/REPEAT (d) to display
, or on the display.
1
: Repeat play of all tracks.
: Repeat play of the selected individual track.
1
: Play tracks randomly.
To cancel repeat or shuffle play, press SHUFFLE/
REPEAT (d) several times until the icons disappear.
> Playback
F019 T159
/; (a) on the remote controller. To
/ (f) to select the folder.
,
Advanced Setup | Firmware Update | Others
Program play (Music CDs)
You can program up to 32 tracks to play.
1. Press MODE (e).
2. The track number (T--) flashes on the display.
CD
PROGRAM
P-01<T--
3. Press / (b) to select the track to register and
: 9
press ENTER (g). Repeat this step to register other
tracks. The last track in the program is deleted if you
press CLEAR (c).
4. Press /; (a) to start play.
0 If you press MODE (e) again while play is stopped, the
entire program is cleared.
0 Shuffle play and 1 track repeat play cannot be used
while playing a program.
E
N