Nikon Nuvis S 2000 Mode D'emploi page 31

4
Getting out of the setting
mode
Press the SEL button and the
corrected date appears on the
LCD panel.
•If another button is pressed while
setting the date/time, all the previously
set data will be set at this time.
•The date appearing in the illustration
above shows "2001, April, 25."
When the battery is replaced
•Note that 00 0 00 appears on the LCD
panel when the battery is replaced.
•No data will be recorded if 00 0 00
appears on the LCD.
•Repeat procedures from 1 to 4 to set the
date and time.
E
31