Fakir Prestige MC Mode D'emploi page 17

• The plastic beaker is used
when working with the mixer
attachments or the mixer rod.
• Strainer
Using this practical strainer you can
press cooked fruit and vegetables
through the sieve.
The strainer is attached to the bottom of
a mixer head with the ribbing. The
single mixer head is then inserted into
the star hole.
• The stand is the basic accessory of
the mixer.
The assembled appliance with the
attachment moves backwards and for-
wards during work in stand mode and
the mixing bowl automatically rotates.
When working in stand mode, the desi-
gnated mixer attachments or kneading
hooks should be used. Each set con-
tains a ribbed mixer attachment and a
ribbed kneading hook.
To guarantee the rotation of the bowl,
please ensure that the ribbed mixer
Operation and use
attachment or kneading hook is inser-
ted into the opening marked with a star.
• Assembly of the appliance on the
stand
After sliding back the cover, place the
appliance with the inserted mixer
attachments or kneading hooks into the
stand holder. Insert the appliance hand-
le under the holder on the stand and
then turn the locking button clockwise
until it clicks into position so that the
overhang of the locking button is verti-
cal.
If the mixer attachments or kneading
hooks are inserted at the same time
this will destroy the appliance as
soon as it is switched on..
• Press the holding key and tilt the hand
mixer with the holder backwards.
• Slightly lift the bowl with the products,
place onto the three overhanging parts
of the stand and then place on the
stand.
17