Keypad - Button; Regeneration Modes - Aerus Origins WC300 Manuel D'utilisation

Keypad - Button

1 2
Figure 20
Button
Down
Set
UP
Regenerate

Regeneration Modes

The WC300 controller can be regenerated either automatically or
manually. During a regeneration, the total time remaining of the
regeneration will be displayed on the controller. The current cycle
is shown in the lower left of the display.
To Initiate a Manual Regeneration:
• Press REGEN once for delayed regeneration. System will
regenerate at next set regen time (2:00 AM).
• A flashing regen (recycle) symbol will be displayed.
• Press and hold REGEN for 5 seconds to initiate immediate
manual regeneration. A solid regen symbol will be
displayed.
• After immediate regeneration has begun, press REGEN
again to initiate a second manual regeneration. A flashing
"x2" symbol indicates the second regeneration will start at
the time of regeneration. Press and hold REGEN to turn on
the second regeneration immediately following the current
regeneration. The double regeneration is indicated by the
"x2" symbol being on steady.
3 4
Function
Scroll down through a list.
Press to accept a setting.
Scroll up through a list.
Starts a regeneration.
During a Regeneration:
• A "C#" is displayed to show current cycle.
• Total regen time remaining is displayed on screen.
• Press and hold SET to show current cycle time remaining.
To Advance Regeneration Cycles:
• Press and hold SET - showing current cycle time.
• Simultaneously press SET and UP to advance on cycle. An
hourglass will display while cam is advancing.
• When cam reaches next cycle, "C2" will be displayed.
• Repeat SET and UP to advance through each cycle.
• Press and hold SET and UP for 5 seconds to cancel regen.
• Hourglass will flash once canceled
• Camshaft will advance to home – may take 1 to 2 minutes.
SU MO
Time & Day
Regen Time & Day
Salt
x2
C
Capacity
Hardness
Regeneration Cycles:
• C1 – Backwash
• C2 – Regeneration Draw/Slow Rinse
• C3 – Slow Rinse
• C4 – System Pause (to re-pressurize tank)
• C5 – Fast Rinse cycle 1
• C6 – Backwash cycle 2
• C7 – Fast Rinse cycle 2
• C8 – Brine Refill
19
TU WE TH FR SA
MIN
Total regen time remaining
Figure 21
DAYS