Tvix Setup Menu - Dvico TViX M-3100U Manuel D'utilisation Et D'installation

4.4

TViX Setup Menu

4.4.1 Audio/Video Setting
* Analog/DPCM
Select this when you connect the audio with stereo RCA cable.(RED and White)Output PCM data.
* Encoded Digital
Select this when you connect the audio with optical or coaxial cable for digital audio connection to the
Decoder/Amplifier. There will not be analog audio out from the analog audio port of TViX.
* HD Component Out
Select this when you connect the video through component(YPbPr) cable. You can select the output
resolution among 480P/720P/1080i. Setting to 1080i will work on all of the HD grade TVs.
* TV OUT
Default video setting of TViX is COMPOSITE (NTSC/S-VIDEO or PAL C/S-VIDEO) This is the most general
setting that works with most of the TV.
NTSC C/YPbPr(480i), PAL C/YPbPr(576i) is a special case. Select these settings if your TV is connected
to TViX with component output.
Note : If you fail to see the initial TViX screen after the unit and TV are turned on, make sure you have
chosen the right TV out option by repeatedly pressing TV Out button on the remote controller.
* TV Type : 4:3 Letter Box / 4:3 Pan & Scan for ordinary TV.
16:9 for Wide TVs like HDTV or Plasma TV.
If the ratio of TV is 4:3, select 4:3 letter box or 4:3 Pan & Scan, if the ratio of TV is 16:9, select 16:9
12