Using The Last Known Good Configuration In Windows 2000; When To Use The Dell Diagnostics - Dell Precision Workstation 360 Guide De Configuration Et De Référence Rapide

Using the Last Known Good Configuration in Windows 2000

Restart your computer and press <F8> when the message
1
operating system to start
Highlight Last Known Good Setting, press <Enter>, press <l>, and then select your
2
operating system when prompted.
Other Options to Help Resolve Additional Device or Software Conflicts
NOTICE: The following processes erase all of the information on your hard drive.
• If the previous procedures did not work, run a low-level format of your hard drive.
See your operating system installation guide for more information.
• Reinstall your operating system using the operating system installation guide and
operating system CD.

When to Use the Dell Diagnostics

If you experience a problem with your computer, perform the checks in "Solving Problems"
in your User's Guide and run the Dell Diagnostics before you contact Dell for technical
assistance. Running the Dell Diagnostics may help you resolve the problem without
contacting Dell. If you do contact Dell, the test results can provide important information
for Dell's service and support personnel.
The Dell Diagnostics allows you to:
• Perform tests on one or all devices.
• Select tests based on a symptom of the problem you are having.
• Choose how many times a test is run.
• Suspend testing if an error is detected.
• Access help information that describes the tests and devices.
• Receive status messages that tell you whether tests completed successfully.
• Receive error messages if problems are detected.
24
Setup and Quick Re ference Guide
appears.
Please select the