PC Locs LocknCharge iQ 10 Sync Charge Station Instructions D'utilisation page 3

Sync and Charge Instructions
Lift the top compartment lid up and slide it
forward to remove it.
STEP 2 - Routing the cables and
assembling your devices
Connect your device cables into the iQ 5 Sync
Charge Box (USB ports).
Route the cable through the rubber grip cable
holder.
INSTRUCTION MANUAL
Charge Only Instructions
Lift the top compartment lid up and slide it
forward to remove it.
STEP 2 - Routing the cables and
assembling your devices
Remove the USB Power Supply's by undoing the
two Philips screws on the bracket.
Ensure that the USB Power Supply's are set on
2.4 amps.