One for All URC-7990 Manuel D'instructions page 4

Keypad
- Using the remote control
Within every device mode (TV, STB, Audio, DVD, Media and Mp3) you can swap between the screens (by shaking
the remote or pressing the corresponding Device key) covering all relevant functions. Some functions may be named
differently or may have a different icon on your original remote. If your function is not present simply use the Copy fea-
ture to obtain the requested function.
The Infinity keypad will light up as soon as you pick up the remote.
When in a device mode (e.g. TV) the first screen that will appear is TV main screen.
"shake" – or – "press the corresponding device key"
to change screen
main screen additional screen
When in a SmartControl mode ("e.g. watch tv") the first screen that will appear is the zapper screen.
"shake" – or – "press the corresponding
SmartControl key" to change screen
zapper screen main screen additional screen
Keypad
- Using the remote control
Key Functions
Settings icon = access to the settings screen (SimpleSet / Search / Macro / Extra /
KeyMove / Copy).
As well as up, down, left and right the corners of the "menu ring"
act as red, green, yellow and blue keys.
The FF/REW keys will send SKIP+/SKIP- when held down briefly.
The SKIP+/SKIP- keys will send FF/REW when held down briefly.
AV / VIDEO INPUT
AUDIO INPUT
Exit
www = internet access
Spare keys that can be used for additional functions that may be present on your original
remote control. You can add these functions using the Copy feature.
Back
-/-- (10)
Last Channel
Picture In Picture (PIP)
Macro (sequence of commands)
Your ONE FOR ALL comes with an easy-to-use Macro feature, allowing you to send
several commands with the press of a single key (e.g. switching all your home theatre
devices ON or OFF with the press of a single key). Please find more info on our website
or simply contact our Call Center – ofahelp@uebv.com.
Key Move
How to program missing functions from your (lost or broken) original remote. Please find
more info on our web site or simply contact our Call Center – ofahelp@uebv.com.
Control Gesture
- Pick up to activate screen
E.g. when in TV mode the first screen that will appear is TV main
screen.
The Infinity keypad will light up as soon as
you pick up the remote.
main screen
E.g. when in "watch tv" mode (SmartControl) the first screen that
will appear is the zapper screen.
The Infinity keypad will light up as soon as
you pick up the remote.
zapper screen
How to disable the pick up feature:
1) Press and hold the "Settings Icon" for 3 seconds. The Setup screen will appear.
2) Press "Extra".
3) Press "9 8 8". The "Power Ring" will blink 4 times.
When disabled press any key to activate the screen.
How to re-enable the pick up feature:
1) Press and hold the "Settings Icon" for 3 seconds. The Setup screen will appear.
2) Press "Extra".
3) Press "9 8 8". The "Power Ring" will blink twice.
Control Gesture
- Shake to switch screen
When in a device mode (e.g. TV) you can alternate between 2
screens by shaking the remote or simply pressing
the corresponding device key (e.g. TV).
main screen additional screen
When in a SmartControl mode ("e.g. watch tv") you can alternate
between 3 screens by shaking the remote or simply pressing the
corresponding SmartControl key (e.g. watch tv).
zapper screen main screen additional screen
How to disable the "shake feature" & "flip over feature":
1) Press and hold the "Settings Icon" for 3 seconds. The Setup screen will appear.
2) Press "Extra".
3) Press "9 8 7". The "Power Ring" will blink 4 times.
When disabled; press the corresponding Device or SmartControl key to switch screen.
How to re-enable the "shake feature" & "flip over feature":
1) Press and hold the "Settings Icon" for 3 seconds. The Setup screen will appear.
2) Press "Extra".
3) Press "9 8 7". The "Power Ring" will blink twice.