Grant XUB Série Mode D'emploi page 18

Screen 2: Time used
This screen shows the total time your Grant digital ultrasonic bath has been in use in
days, hours and minutes; i.e. the sum of all the cleaning cycle times since new.
For example, the screen above shows that the bath has been in use for a total of 2
days, 5 hours and 27 minutes.
Screen 3: Clock
The Grant digital ultrasonic bath is fitted with a real time clock. This is factory set to
the correct time and date, but can be changed by the operator.
To change the time and date, scroll through the settings by pressing the MENU key
and amend by pressing the UP and DOWN keys. When all the settings are correct,
press the MENU key to move to the next screen.
Screen 4: Cycle count
The second screen shows the number of cycles which the Grant digital ultrasonic bath
has run since new.
The cycle count shows all cycles which the bath has begun and includes those cycles
which are not completed; i.e. those cycles aborted by the operator or because the fluid
level was low.
XUB Series 16 29666 V1
Operating Manual