Grant XUB Série Mode D'emploi page 12

Screen 2: Setting the cycle time
Your Grant digital ultrasonic bath is factory preset with a cycle time of 15 minutes. Use
this screen to amend the cycle time. Use the UP and DOWN keys to scroll through the
numbers in order to increase or decrease the time.
When the desired cycle time has been selected, use the MENU key to move to the
next screen. This time setting will be saved until changed again in the Operator menu.
Screen 3: Setting the power level
Your Grant digital ultrasonic bath allows the power level of the ultrasonic activity to be
adjusted. This allows the cleaning cycle to be accurately tailored to the specific
cleaning application.
Use the UP and DOWN keys to scroll through the numbers between 50 and 100%.
When the desired power level has been selected, use the MENU key to move to the
next screen.
XUB Series 10 29666 V1
Operating Manual