Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TRANSPORTATION TIPS
WHEN STRAPPING TO ROOF,
BOARD SHOULD BE BOTTOM SIDE UP.
When securing your paddle board to the roof of a vehicle, always place the board bottom side up.
Placing the board topside up will create wind drag and instability while driving. Placing board nose
forward or tail forward are both acceptable means of transport .
OVER-TIGHTENING STRAPS MAY RESULT
IN PRESSURE DINGS.
PADDED STRAPS ARE RECOMMENDED
OVER NON-PADDED NYLON STRAPS.
FOR WARRANTY INFORMATION, PARTS/ACCESSORIES, CALL
1-800-370-0745 OR CONTACT US THROUGH OUR WEB SITE,
WWW.JIMMYSTYKS.COM
16
ENGLISH
REMOVE VENT CAP AND O-RING WHEN
STACKING MULTIPLE BOARDS.
The JS vent cap may cause pressure dings when stacking multiple boards. Completely remove vent cap and
o-ring prior to stacking boards. As a precaution, placing a cushioned barrier between stacked boards will
further protect against dings and cracks.
DAMAGES RESULTING FROM IMPROPER
CARE/HANDLING ARE VOID OF WARRANTY.
17
SEC TI ON 6
Q U E S T I O N S / C O M M E N T S :
1 - 8 0 0 - 3 7 0 - 0 7 4 5
Publicité
Table des Matières
