Horizon Fitness ADVENTURE 1 Guide De Montage page 4

ASSEMBLY STEP 1 (Adventure 7)
Adventure
7
shown
1
2
A
6
HZ15_AG_Adv_1_3_5_7_r1_0.indd 6-7
HARDWARE FOR STEP 1
PART TYPE DESCRIPTION
A BOLT M8X1.25PX60L-30L
A Cut the yellow banding straps and lift the
3 running deck upward to remove all contents
from underneath the running deck.
B Open HARDWARE FOR STEP 1.
C Attach LEFT CONSOLE MAST (1) to MAIN
FRAME (2) using 3 BOLTS (A) and do not
tight these 3 BOLTS (A).
D Carefully slid down the LEFT CONSOLE MAST
COVER (3) to LEFT CONSOLE MAST (1).
NOTE: Do not assemble CONSOLE MAST COVER
BOLTS (I) at this step.
ASSEMBLY STEP 2 (Adventure 7)
QTY
3
4
HARDWARE FOR STEP 2
PART TYPE
A BOLT
7
A Pull the BASE CABLE (5) away from the
treadmill base frame. Connect the CONSOLE
10
CABLE (5) from the MAIN FRAME (4) to the
CONSOLE CABLE (5) in the bottom of the
6
RIGHT CONSOLE MAST (6). The other end of
the CONSOLE CABLE (10) should be located
A
at the top of the mast.
B Open HARDWARE FOR STEP 2.
5
C Attach RIGHT CONSOLE MAST (6) to MAIN
FRAME (4) using 3 BOLTS (A), and do not
tight these 3 BOLTS (A).
D Carefully slid down the RIGHT CONSOLE
MAST COVER (7) to RIGHT CONSOLE MAST
(6).
NOTE: Do not assemble CONSOLE MAST COVER
BOLTS (I) at this step.
DESCRIPTION QTY
M8X1.25PX60L-30L 3
Adventure
7
shown
7
7/13/15 2:41 PM