GMC DB250SMS Consignes De Sécurité page 19

Troubleshooting
Problem
No operation
No sliding action
Stiff or rough sliding
action
Cutting performance
poor
Power tool vibrating
excessively in use
Mitre position difficult to
adjust
Possible Cause
Plug fuse
worn brushes
power tool fault
slide lock engaged
build up of sawdust in mechanism
teeth worn or damaged
Incorrect saw blade type
Incorrect blade specification
incorrectly fitted blade
saw blade distorted, bent or damaged
saw blade incorrectly mounted
machine fault
build up of sawdust
Suggested corrective action
have brushes replaced by an authorised GMC service centre
contact an authorised GMC service centre
vacuum and lubricate mechanism
replace blade with correct type for material being sawed
Ensure blade meets the required blade specification for this mitre
remove blade and re-fit exactly as per the instructions in this manual
replace blade immediately
re-fit blade exactly as per the instructions in this manual
contact an authorised GMC service centre
vacuum up sawdust
19
replace fuse
release slide lock
replace blade
saw
GB