Intenso TAB 814 Mode D'emploi page 36

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 97
Should the device not respond to your requests, please restart the device by pressing the reset
button on the back of it.
When not in use, please disconnect the mains adaptor from the power supply.
The outlet must be near the equipment and easily accessible.
Only use the AC adapter with grounded outlets with AC 100-240V, 50/60 Hz. If you are not sure
about the power supply at installation site, please ask the relevant energy services.
Use only the included AC adapter and power cord.
To interrupt the power supply to your unit, unplug the AC adapter from the outlet. Always hold
the adapter firmly when disconnecting the power supply. Never pull on the line.
Do not open the housing of the power adapter. With open housing, there is danger of electrical
shock. It contains no user-serviceable parts.
When not in use, the battery of the device discharges slowly. Prior to reuse it must be
recharged.
Please observe environmentally sound disposal of the device and the battery.
Please do not disassemble into parts or try to repair it yourself because in these cases the
warranty expires.
Do not use the device in places where the use of mobile devices is prohibited. Do not use the
device in the vicinity of other electronic devices because the high-frequency signals can cause
interferences.
Do not use it near a pacemaker, in a hospital or near medical equipment, because the high-
frequency signals may cause interferences. Keep a distance of at least 15 cm from a
pacemaker. Please contact the manufacturer of these devices to obtain information about joint
use.
The use of earbuds or headphones at high volumes can lead to permanent hearing damage.
For reasons of traffic safety, the device may not be operated by the driver himself while driving.
EN - 3

Publicité

Table des Matières
loading

Table des Matières