Sartorius YCC01-USBM2 Notice D'installation page 6

Notes on Installation
The following installation instructions can be found
on the enclosed CD-ROM:
– for Windows 98SE
– for Windows ME
– for Windows 2000
– for Windows XP
Changing the Port Number
If you use the USB interface with a program that limits
the number of COM port designations (e.g., only COM1
through COM4), you may have to assign one of these port
numbers to the new virtual port.
– Select "Start" (on the task bar)
Panel"
– Select "System"
– Click on the "Hardware" tab and then on the
"Device Manager" button
– Expand the "Ports (COM & LPT)" node
(click on the "+" sign)
– Double-click on "USB Serial Port (COMx)" to open the
"Porpoerties" page
– Click on the "Port Settings" tab and then on the
"Advanced..." button
Changing the Latency Timer
In the dialog opened above for changing the port number,
you can set the latency timer to 1 msec for faster data
communication.
6
®
: see "w98guide.htm"
®
: see "wmeguide.htm"
®
: see "w2kguide.htm"
®
: see "wxpguide.htm"
"Settings" "Control