CONTROLS
The hood is fitted with a control panel with aspiration speed selection control and a light switch to control cooking area lights.
T1. ON/OFF "Night Light"
T2. Main Light ON/OFF – Select the colour temperature
T3. Operation "ZEN Mode"
T4. Motor ON/OFF
T5. "POWER BOOST 1" function
T6. "POWER BOOST 2" function
T7. Automatic Mode"Cook Sense"
T8. Filter saturation indicator
T9. ON/OFF operating mode "Daily Air Sense"
T10. ON/OFF operating mode"Intensive Air Sense "
T1. ON/OFF "NIGHT LIGHT"
Press to switch the soft background lighting on or off.
T2. MAIN LIGHT ON/OFF – SELECT THE COLOUR TEMPERATURE
Press to switch the main light on or off.
• With the lights on, use your finger to swipe right or left over the SL1 LED strip to increase or decrease the intensity of the light.
To set the colour temperature of the lighting
• Press (and hold) again,
• use your finger to swipe right or left over the SL1 LED strip to set the intensity of the light colder or warmer.
If you do not change the colour for five seconds, SL1 will flash at the colour setting you have selected and an audible signal will sound to
indicate that the system has saved this configuration.
Please note: The light will come on at the last intensity you set before switching the appliance off.
T3. OPERATION "ZEN MODE"
Press to activate or deactivate the "ZEN" extraction mode.
This function makes it possible to activate an extraction speed with the perfect balance between quietness and extraction efficiency.
T4. MOTOR ON/OFF
Press to switch the extraction motor on or off.
• With the motor on, use your finger to swipe right or left over the SL2 LED strip to increase or decrease the extraction speed.
T5. "POWER BOOST 1" FUNCTION
With the extraction motor on, press T5 to activate the "POWER BOOST 1" intensive extraction speed (time-controlled).
Please note: the hood will go back to running at the speed it was previously using after five minutes.
T6. "POWER BOOST 2" FUNCTION"
With the extraction motor on, press T6 to activate the "POWER BOOST 2" intensive extraction speed (time-controlled).
Please note: the hood will go back to running at the speed it was previously using after five minutes.
T7. AUTOMATIC MODE "COOK SENSE"
The hood will increase the extraction speed to 1 automatically if the sensor in the hood detects that the ambient conditions require this.
If the ambient conditions do not change – and the hood is already using extraction speed 1 – the hood will switch off after five minutes.
Please note: to make sure this function is used correctly, please configure the parameters for automatic mode first as described in the
relevant section.
Please note: when using automatic mode, if you change any other
functions that control the speed, the "Cook Sense" function will switch off.
T8. FILTER SATURATION INDICATORS
At regular intervals, the hood signals the need to perform filter maintenance.
Please note: The indicators will only work when the hood is on.
T8 button lit: Carry out maintenance on the grease filter.
23