Secondary Air Tubes - Timberwolf 2200-1 Manuel D'installation Et D'opération

4.5

secondary air tubes

1.
Start at the back working forwards by sliding the secondary air tube in the fi rebox and inserting the tube
into the hole.
2.
Slide the tube into the opposite hole. With the holes on the secondary air tube pointing forward, align the
tube with the tube retainer and insert the cotter pin.
3.
Spread the cotter pin to retain.
note:
There are 4 secondary air tubes. One of the tubes has larger holes. This tube is to be located closest to the
front of the appliance (Fig. 4-4).
3
fi nishing
EN
Fig. 4-4
21
W415-1930 / A / 10.21.19