LiftMaster CAPXL Manuel D'installation page 24

INTRODUCTION
Upgrade CAPXL with CAPXLCAM
NOTE: CAPXLCAM is the only USB camera supported by CAPXL and myQ
video features. CAPXLCAM is the only camera evaluated by UL for use with CAPXL.
PRIOR TO CAMERA INSTALLATION
1. Make note of all Internet connectivity settings before any fi rmware update.
When updating fi rmware Internet settings will be deleted. Go to the CAPXL
connection screen in admin mode and write down or take picture of settings.
2. Ensure CAPXL is running Firmware version 2.0 or higher. Warning: The CAPXL
upgrade process requires a restart and could be non-functional for up to 30
minutes while this upgrade takes place. Please ensure the gates/doors are open
or residents have an alternate means to enter to the community during this brief
period prior to hitting the upgrade button in myQ
technician on site to ensure safe operation and resident fl ow.
3. Login to myQ ® Business™ to update the CAPXL to the latest fi rmware version.Turn
off power by disconnecting the power input on the I/O board.
4. Remove the protective LENS cover from the camera assembly lens.
NOTE: Camera lens cover must be removed prior to mounting in the CAPXL.
Installation
1. Open CAPXL and remove the existing black camera bracket
(top middle) by loosening and removing the wingnut.
2. Ensure CAPXL camera window is clean and free of any
obstructions. Cleaning the camera window with a clean lens
wipe or lens cloth is recommended.
3. Remove all items from shipping carton and ensure all
required items are present: camera assembly, camera
bracket, USB cable, and mounting hardware bag.
4. Use the mounting hardware to attach the new bracket with
camera to the CAPXL. Securely tighten.
5. Use pliers to unplug the upper right dummy plug from USB
socket on control board (controller). (Figure 1.A)
6. USB Port #3 must be used to connect the camera. The
Micro USB end of the USB cable goes into the camera and
the standard USB end of the cable specifi cally connects to
USB port #3, (the upper right USB port on the controller.)
(See Figure 1.B)
7. Route and secure USB cable with included tie-wraps.
(Figure 2)
8. Turn on power to the CAPXL.
9. Enter CAPXL Admin Mode using the #1 dip switch. Select
the "Audio / Video" tab and confi rm the video feed appears,
the angle and orientation is correct. (Figure 3)
10. Refer to the myQ ® Business™ Quickstart Guide and visit
the help section of the myQ
videos and futher assistance with setting up the camera
functions. Features such as the recording of events, the
Guest View Feature, and more are set up within the myQ
Business™ account.
Access your myQ ® Business™ account at:
https://www.myQBusiness.com
®
myQ Business™ Help and Tutorial Videos:
https://www.myQBusiness.com/Help
NOTE: Options such as live streaming within myQ
Business™ are included with an access control
subscription.
NOTE: Please refer to the specifi c jurisdiction to determine if specifi c signage will be required for video use and monitoring.
PRE-INSTALL
®
Business™. This may require a
®
Business™ website for tutorial
®
INSTALL
® Business™
Carton Inventory
• Camera assembly
• Camera bracket
• USB cable
• Mounting hardware bag (2x Screws)
T o p
B o t t o m
1. A
Figure 1. Removing the dummy USB and connecting to USB Port #3 on the upper right side of the controller.
®
Figure 2. Routing the USB cable.
ON
1 2 3 4
Figure 3. Admin Mode.
24
NETWORK ACCESS CONTROL
Recommended Tools
• Network Test Software
• Philips Screwdriver
• Network LAN Cable Tester • Pliers
r t # 3
S B P o
i g h t U
T o p R
1. B
Dip Switch #1
on the Power / Internet board
enters Admin Mode.
ON
• Wi-Fi / Wi-Fi Hotspot
• Wi-Fi Analyzer App