Publicité
Les langues disponibles
Les langues disponibles
Use as designated
This machine is only determined for sharpening saw chains. Before commissioning the device must be fixed to a workbench or an
other similar surface. Use the chainsaw sharpener only if you fully appreciate all the functions and perform without restrictions or have
received appropriate instructions.
This machine must not be used for any works other than for which the machine has been designed and that are specified in the
Operating Instructions.
Any other use will be considered a use in conflict with the designation. The manufacturer will not be liable for any consequential
damage or injuries. Please be sure to know that the machine has not been designed for industrial purposes.
Residual Hazards and Protective Action
Mechanical Residual Hazards
Hazard
Incision, cutting
Catching, winding up
Nick, scrape
Electrical Residual Hazards
Hazard
Direct electrical contact
Noise Hazard
Hazard
Hearing impairment
Material and Other Substances Hazards
Hazard
Contact, breathing in
Fire or explosion
Human Factors Neglect
Hazard
Insufficient local lighting
Other Hazards
Hazard
Breakage in operation
Rejected objects or fluids
Description
Teeth of the saw chain may
cause incisions .
Loosely-fitting clothes any
jewellery may be caught by
rotating parts .
A contact with the rotating
grinding disc may result in
severe injury
Description
Defective cables or plugs may
cause electrical shock.
Description
Prolonged work with unit may
result in hearing impairment.
Description
Dust nuisance may cause
impairment of lungs .
Metal grinding produces
sparkles and the easily ignitable
substance/petrol) may ignite.
Description
Insufficient lighting produces a
high safety hazard.
Description
Defective grinding discs may
break in operation and cause a
severe injury to the operator
Fragments of the disc may
cause an injury of your eyes
Protective Action
Always wear protection gloves
when working with the unit
Always wear tightly fitting
clothes and avoid any jewels
that could be caught .
Never touch the grinding disc
while in motion .
Protective action
Always have the defective
cables or plugs replaced by a
professional. Do not use the
unit unless with stray current
protection (FI)
Protective action
Wear ear protectors.
Protective action
Filter respirator is
recommended
Do not use the unit close to
easily inflammable substances
Protective action
Provide for sufficient lighting
when working with the unit.
Protective action
Check the grinding disc for
defects on a regular basis.
Avoid any use of a defective
disc. Always wear protective
clothing in conformity with the
job.
Always wear protective goggles
when working on the unit.
32
Residual Hazard
Residual Hazard
Residual Hazard
Residual hazard
Residual hazard
Residual hazard
Publicité
