Operating The Machine; Preparation - Yard force SA900B Notice Originale

GB
SAFETY PRECAUTIONS
Lightning Protection
In order to prevent lightning damage to the machine, do
not place the docking station under tall trees.

Operating the machine:

WARNING! This machine can cause serious injury.
Follow instructions below to reduce risk of accident
and injury.
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE

Preparation:

• Read the instructions carefully and make sure you
understand them fully. Be familiar with the controls
and the proper use of the machine.
IMPORTANT
14
SAFETY PRECAUTIONS
• Never allow children, persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge or people unfamiliar with these
instructions use the machine.
• Local regulations may restrict the age of the operator.
Children should be supervised to ensure that they do
not play with the appliance.
• The operator or user is responsible for accidents or
hazards occurring to other people or their property.
• Ensure the correct installation of the perimeter
boundary system as instructed.
• Periodically inspect the area where the machine
is to be used and remove all stones, sticks, wires,
and other debris which could cause damage to the
machine or be unsafe.
• Periodically inspect to see that the blades, blade
bolts and cutter assembly are not worn or damaged.
Replace worn or damaged blades and bolts in sets to
preserve balance.
• On multi-spindle machines, take care as rotating one
blade can cause other blades to rotate.
• Never leave the machine unattended while other
people such as children and pets are in the area.
• Never use the machine to level out uneven patches.
• If the blades no longer cut correctly or if the motor is
overloaded, check all the parts of your equipment and
replace the worn parts. If a more extensive repair is
required, contact the customer service centre.
15
GB