Würth 1952 004 240 Mode D'emploi page 5

DE
GB
INTRODUCTION
FR
It is compulsory to read this instruction manual before starting any
kind of action.
NL
The proper operation and full compliance of this product's
performance is guaranteed only if all the instructions provided in this
ES
manual are closely adhered to.
We guarantee that this product complies with the technical
IT
specifications described in this manual.
The manufacturer shall not be held responsible for any improper
uses other than those described herein.
PT
Use protective work gloves, protective footwear, hard hat and safety
goggles.
PL
Misuse:
- This product should only be used as described in this
DA
documentation; any other use is considered improper.
- The manufacturer accepts no responsibility for any
damage caused by the incorrect or unreasonable use of
EL
the equipment.
- Moreover, misuse shall also void the warranty.
Take care of your tools:
- Be sure to store your tools in a clean state.
- Place the tools inside their original package.
Set of adapters for pit lifts
Allows you to use Wurth 1952 004 180 (fig. 1) and 1952 004
230 (fig. 2), items in combination with pit lifts of other manufacturers
(fgi. 3).
The lift's stem is not damaged thanks to the plastic finish of the
adapters.
Adapter size 1 - outside Ø 40mm for Ø 25mm stem, Length
50mm
Adapter size 2 - outside Ø 40mm for Ø 30mm stem, Length
50mm
Adapter size 3 - outside Ø 40mm for Ø 35mm stem, Length
50mm
METHOD OF PREPARATION
1
2
3
5