Intenso POWERBANK S10000-C Mode D'emploi page 14

Operation
1. Status display LED
The actual charging status of the Powerbank will be showed to you by the
LED status when you charge and/or discharge the Powerbank.
LED light
% - Energy
1 % - 25 %
26 % - 50 %
51 % - 75 %
76 % - 100%
2. Starting-Up / Powerbank Charge / Charging
Connected Devices
a) Charging the Powerbank
Please connect the included Micro USB cable to the micro USB port (IN) of
the Powerbank, and connect the other end of the USB cable to a standard
USB port of a computer or USB power adapter. The charging process and
current charging status is indicated by the LED status lights. If the
Powerbank is fully charged, the LED status lights remain illuminated. The
required charging time of the Powerbank depends on the selected charging
source and the output power (5V / 2.1A).
b) Charging devices through the Powerbank
 This Powerbank has a USB port (OUT) (output 2.1A) and an integrated
USB cable (OUT) with Type-C plug (output 2.1A).
 There are two possibilities to charge a device through Powerbank:
Possibility 1: Connect the Type-C (OUT) connection of the integrated
cable with the micro-USB entry of the device to be charged. The charging
process will start automatically.
Possibility 2: Connect the supplied USB-cable with the USB A (OUT) entry
of Powerbank and the other ending of the USB cable with the micro-USB
entry of the device to be charged.
LED 1 LED 2
● ○
● ●
● ●
● ●
Page 5 of 8
LED 3
○
○
●
●
EN
LED 4
○
○
○
●