Gira 5491 Série Manuel D'utilisation page 7

Bouton-poussoir de commande de store radio simple
Manual saving of the scene
values
Priority, lock-out protection
Activate lock-out protection
blind position
Activate lock-out protection
slat position
Deactivate lock-out protection
blind position
Deacitvate lock-out protection
slat position
Priority, restraint
Activate force operation blind
position
Recall forced operation slat
position
Deactivate force operation
blind position
Deacitvate forced operation
slat position
Priority, wind alarm
32582622 10864996
On, Off
Basic setting: On
0...4
Basic setting: 1
0 ... 100 %
Basic setting: 0 %
0 ... 100 %
Basic setting: 0 %
0 ... 100 %
Basic setting: 0 %
0 ... 100 %
Basic setting: 0 %
0...4
Basic setting: 2
0 ... 100 %
Basic setting: 0 %
0 ... 100 %
Basic setting: 0 %
0 ... 100 %
Basic setting: 0 %
0 ... 100 %
Basic setting: 0 %
0...4
Basic setting: 3
22.03.2017
Disables the saving of the cur-
rent Venetian blind position as
scene value in an actuator for
a command via a transmitter.
Specifies the priority for recal-
ling and removing a scene of
type Lock-out protection for
the channel.
Defines the behaviour of the
output on activating the lock-
out protection.
Defines the slat position of the
output on activating the lock-
out protection. Only visible
when the Venetian blind ope-
rating mode is set.
Defines the behaviour of the
output on deactivating the
lock-out protection. Only vi-
sible when the priority for the
lock-out protection is 0.
Defines the behaviour of the
output on deactivating the
lock-out protection. Only vi-
sible when the priority for lock-
out protection is 0 and the Ve-
netian blind operating mode is
set.
Specifies the priority for recal-
ling and removing a scene of
type Restraint for the channel.
Defines the behaviour of the
output on activating the forced
operation.
Defines the slat position of the
output on activating forced
operation. Only visible when
the Venetian blind operating
mode is set.
Defines the behaviour of the
output on deactivating the for-
ced operation. Only visible
when the priority for the forced
operation is 0.
Defines the slat position of the
output on deactivating forced
operation. Only visible when
the priority for the forced ope-
ration is 0 and the Venetian
blind operating mode is set.
Specifies the priority for recal-
ling and removing a scene of
type Wind alarm for the chan-
nel.
7/10