BioEnergiser Circulation Maxx Reviver Manuel D'instruction page 3

QUIC K START GUIDE
PLEASE NOTE ‒ THIS DEVICE DOES NOT VIBRATE ‒ IT USES ELECTRICAL IMPULSES, NOT VIBRATION!
For detailed operation of your Circulation Reviver
comprehensive instructions within this manual.
To use Circulation Reviver
TM
1
2
3
4
5
For more information about BioEngergiser Products visit our website at: www.globalproductcom
please refer to the
TM
immediately, follow this 5-point quick start guide.
Remove your Circulation Reviver
Take out the Remote Control and remove the screw from the back battery
enclosure.
Insert 2 x AAA batteries into the compartment as per indication. Then
screw up the battery enclosure.
Connect the DC adapter to a suitable mains outlet and plug the small DC
socket into the device.
Turn on the power the central display will light up orange.
Remove your footwear and socks or stockings. Sit in a comfortable chair.
Both bare feet need to be on the device for it to work. Your left foot on the
left foot plate, and your right foot on the right foot plate.
Increase the intensity levels for the foot by pressing the "SOLE+"
or press "SOLE ‒ " to decrease the intensity.
The intensity level ranges from 0-99, slowly increase the level until you
begin to feel the micro-current stimulation.
from the packaging.
TM
3
1