Installation
Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts
with package contents list on previous page. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for replacement parts.
1
Removing the difusser
Turn the diffuser (B) counterclockwise
□
to remove it from the housing plate.
3
Connecting the wires
Connect the black and the white wires of
□
the fixture with two wires of the same
colors from the junction box. Secure
together using wire nuts (AA).
Connect the grounding wire of the fixture
□
with the one from the junction box.
Secure together using a wire nut (AA).
ETi SSL Inc. - The Americas Headquarters
720 Corporate Woods Parkway
Vernon Hills, IL 60061
2
4
A
AA
4
Installing the mounting
screws
Install the mounting screws (BB) in the
□
junction box.
Attaching the housing to the
junction box
Align the keyholes in the housing (A) with
□
the mounting screws (BB). Then rotate (A)
to securely fit to junction box and tighten
screws to secure.
Please contact 1-855-384-7754 for further assistance.
BB
BB
www.ETiSSL.com