Changing The Measurement Unit; Explanation Of Symbols/Error Messages - Inventum MT 22 Mode D'emploi

5 | changing the measurement unit
The temperature can be displayed in degrees celsius (°c) or degrees
Fahrenheit (°F). press the button '
Without releasing it press the 'M' button to switch to the desired
measuring unit. All saved values are displayed in the new measuring unit.
6 | expLanation of symboLs/ error messages
Message problème
d'erreur
Ambient temperature below
16°c or above 35°c (< 60,8°F,
> 95°F)
The temperature measured is
higher than 43°c (109,4°F).
The temperature measured is
lower than 34°c (93,2°F).
' to change the measuring unit.
Solution
The ambient temperature must be
between 16°c and 35°c (60,8°F,
95°F).
Operate the thermometer only
between the specified temperature
ranges. If necessary, clean the sensor
tip. In the event of a repeated error
mesaage, contact your dealer or
customer service.
Operate the thermometer only
between the specified temperature
ranges. If necessary, clean the sensor
tip. In the event of a repeated error
mesaage, contact your dealer or
customer service.
29