Table des Matières
Publicité
Installation/dimensions for bracket in case of vertical installation
1. Fit retaining plate
3. Fit printer by screw plates in retaining plate A!
Instruction de service Installation de mesure MAK TIGER 3003, SA 140123, 13.05.2020
Imprimante thermique, type 6761-11
2. Fit screw plates on printer
a)
Affix the top plate through the holes marked
no. "3"
b)
Affix the bottom plate through the holes
marked no. "4" using the screws provided
135
Publicité
Table des Matières
