Samsung HT-D423H Manuel D'utilisation page 18

Masquer les pouces Voir aussi pour HT-D423H:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connections
NOTE
`
Resolutions available for the HDMI output are 480p(576p), 720p,1080i/1080p. See page 22 for the resolution
setting.
`
This product operates in Interlace scan mode 480i(576i) for component/composite output.
`
After making the video connection, set the Video input source on your TV to match the corresponding Video
output mode on your product.
Turn this product on first before you set the video input source on your TV. See your TV owner's manual for
more information on how to select the TV's Video Input source.
!
CAUTION
`
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
HDMI FUNCTION
HDMI Auto Detection Function
If your TV is Samsung TV and it supports CEC function.The product's video output will automatically change to HDMI
mode when connecting an HDMI cable while power is on.
HDMI (High Definition Multimedia Interface)
~
~
HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture
on a TV having an HDMI input jack.
HDMI connection description
~
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears
on the screen.
~
What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via
~
HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized
copies from being made.
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote
control. Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable. This is
only available with SAMSUNG TV's that support Anynet+.
1.
Connect the product to a Samsung TV with an HDMI cable. (See page 17)
2.
Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
NOTE
`
The Anynet+ function supports some buttons of the remote control.
`
This function is not available if an HDMI cable does not support CEC.
`
Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the user's manual of your TV.
`
Please check the
1
English
HT-D423H-XU-ENG-0315.indd 18
logo (If your TV has an
logo, then it supports Anynet+ function.)
2011-03-18
3:46:25

Publicité

Table des Matières
loading

Table des Matières