Conventional Oven Operation; Rack Positions; Inserting Racks - Thermador Professionl Série Mode D'emploi

Conventional Oven Operation

Rack Positions

There are seven positions with position one starting at
the bottom of the oven. Rack positions are called out
throughout the manual to help optimize cooking
performance.

Inserting Racks

CAUTION
9
To avoid burns, place oven racks in desired
▯
positions before turning oven on. Always use
oven mitts when the oven is warm. If a rack must
be moved while the oven is hot, do not let oven
mitts contact hot heating elements.
Use caution when removing oven racks from the
▯
lowest rack position to avoid contact with the hot
oven door.
To avoid possible injury or damage to the
▯
appliance, ensure racks are installed exactly per
installation instructions and not backwards or
upside down.
Flat Rack
The rack is designed with a stop so it will stop before
coming completely out of the oven and not tilt.
To insert Flat Rack into Oven:
Grasp rack firmly on both sides.
1.
Insert rack (see picture).
2.
Tilt rack up to allow stop into rack guide.
3.
Bring rack to a horizontal position and push the rest of
4.
the way in.
Rack should be straight and flat, not crooked.
To remove Flat Rack from Oven:
Grasp rack firmly on both sides and pull rack toward
1.
you.
When the stop is reached, tilt rack up and pull the rest
2.
of the way out.
43