Care And Cleaning - ShelterLogic ShelterCoat Instructions De Montage

Masquer les pouces Voir aussi pour ShelterCoat:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ATTENTION:
This shelter product is manufactured with quality materials. It is designed to fit the ShelterLogic
ShelterLogic
Corp. Shelters offer storage and protection from damage caused by sun, light rain, tree sap, animal / bird excrement
®
and light snow. Please anchor this ShelterLogic
keeping cover tight and free of snow and debris is the responsibility of the consumer. Please read and understand the installation detail,
warnings and cautions prior to beginning installation. If you have any questions call the customer service number listed below. Please
refer to the warranty card inside this package.
DANGER:
Prior to installation, consult with all local municipal codes regarding installation of temporary shelters.
Choose the location of your shelter carefully. DANGER: Keep away from electrical wires. Check for
overhead utility lines, tree branches or other structures. Check for underground pipes or wires before
you dig. DO NOT install near roof lines or other structures that could shed snow, ice or excessive run
off onto your shelter. DO NOT hang objects from the roof or support cables.
WARNING:
Risk of fire. DO NOT smoke or use open flame devices (including grills, fire pits, deep fryers, smokers or
lanterns) in or around the shelter. DO NOT store flammable liquids (gasoline, kerosene, propane, etc.) in
or around your shelter. Do not expose top or sides of the shelter to open fire or other flame source.
CAUTION:
Use CAUTION when erecting the frame. Use safety goggles during installation. Secure and bolt together
overhead poles during assembly. Beware of pole ends.
PROPER ANCHORING AND INSTALLATION OF FRAME:
PROPER ANCHORING OF THE FRAME IS THE RESPONSIBILITY OF THE CONSUMER.
ShelterLogic
Corp. is not responsible for damage to the unit or the contents from acts of nature. Any shelter that is not anchored
®
securely has the potential to fly away causing damage, and is not covered under the warranty. Periodically check the anchors to ensure
stability of shelter. ShelterLogic
quickly removed and stored prior to severe weather conditions. If strong winds or severe weather is forecast in your area, we
recommend removal of cover.
REPLACEMENT PARTS, ASSEMBLY, SPECIAL ORDERS:
Genuine ShelterLogic
Corp. replacement parts and accessories are available from the factory, including anchoring kits for nearly any
®
application, replacement covers, wall and enclosure kits, vent and light kits, frame parts, zippered doors and other accessories. All
items are shipped factory direct to your door.
QUESTIONS - CLAIMS - SPECIAL ORDERS? CALL OUR CUSTOMER SERVICE HOTLINE:
U.S. CUSTOMER SERVICE: 1-800-524-9970 INTERNATIONAL CUSTOMER SERVICE: 001-860-945-6442 CANADA CUSTOMER SERVICE: 1-800-559-6175
HOURS OF OPERATION: MON-FRI 8:00AM-8:00PM EST, SAT-SUN 8:00AM-4:30PM EST.

CARE AND CLEANING:

A tight cover ensures longer life and performance. Always maintain a tight cover. Loose fabric can accelerate
deterioration of cover fabric. Immediately remove any accumulated snow or ice from the roof structure with a
broom, mop or other soft-sided instrument.
remove from outside the structure. DO NOT use hard-edged tools or instruments like rakes or shovels to
remove snow. This could result in punctures to the cover. DO NOT use bleach or harsh abrasive products to
clean the fabric cover. Cover is easily cleaned with mild soap and water.
WARRANTY:
This shelter carries a limited warranty against defects in workmanship. ShelterLogic
properly used and installed, the product and all associated parts, are free from manufacturer's defects for a period of:
1 YEAR FOR COVER FABRIC, END PANELS AND FRAMEWORK.
Warranty period is determined by date of shipment from ShelterLogic
reseller, (please save a copy of your purchase receipt). If this product or any associated parts are found to be defective or missing at the time of receipt,
®
ShelterLogic
Corp. will repair or replace, at it's option, the defective parts at no charge to the original purchaser. Replacement parts or repaired parts
shall be covered for the remainder of the Original Limited Warranty Period. All shipping costs will be the responsibility of the customer. You must save
the original packaging materials for shipment back. If you purchased from a local dealer, all claims must have a copy of original receipt. After purchase,
please fill out and return warranty card for product registration. Please see warranty card for more details. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
Covered by U.S. Patents and patents pending: 6,871,614; 6,994,099; 7,296,584; D 430,306; D 415,571; D 414,564; D 409,310; D 415,572
Corp. structure properly. See manual for more anchoring details. Proper anchoring,
®
Corp. cannot be responsible for any shelter that blows away. NOTE: Your shelter's cover can be
®
Use extreme caution when removing snow from cover- always
Corp. warrants to the Original Purchaser that if
®
®
Corp. for factory direct purchases or date of purchase from an authorized
Page 2
Corp. custom fabric cover included.
®
05_GP-AA-XXXXXXA-022XXX11_H0
08192015

Publicité

Table des Matières
loading

Table des Matières