Domo DO906K/A++ Mode D'emploi page 33

5. Remove the adjustable foot from another side of the bottom and transfer it to the
corresponding position on the opposite side of the bottom.
6. Attach the screws, hinge bracket and adjustable foot to the opposite side of the bottom.
Loosely secure.
7. Carefully set the door back into place. Ensure the door is aligned horizontally and
vertically so that the seals are closed on all sides before finally tightening the bottom
hinge. Insert the top hinge back and screw it to the top of the appliance.
8. Use a spanner to tighten it if necessary.
9. Put the top cover back and fix it in place with the screws.
10. With the door closed, check that the door is aligned horizontally and vertically and that
the seals are closed on all sides before finally tightening the bottom hinge. Readjust the
levelling feet as required.
www.domo-elektro.be
33
DO906K/A++