Disposal And Recycling - Sigel Artverum GL 235 Instructions De Montage Et Consignes De Sécurité

3 | MOUNTING SEVERAL BOARDS IN A ROW
Please note the following if mounting several boards next to each other:
Due to the fragile glass edges, the magnetic glass boards should not be mounted right next to each other. There should be a gap of at least 3
mm between the individual boards. When mounting the boards, make sure the edges do not knock against each other, as this can cause the
board to break. SIGEL is not liable for any damage caused in this way. Do not remove the edge protector or the protective corners until the
mounting process is complete.
Mount the first magnetic glass board as described under "Mounting" before marking the drill holes for the next board. This will allow you to
adjust the position of the additional boards to any slight inaccuracies there may be in the position of the first board.
USE & CLEANING
The glass surface should be written on using only special markers for glass. The magnetic glass board can be cleaned with a damp or dry cloth.
Please do not use abrasive scouring agents, detergents or chemicals to clean the board. To prolong the life of your board, we recommend using
our own SIGEL accessories.
GUARANTEE
* We offer a 25-year guarantee that the glass surface will remain perfect to write on and to clean. We guarantee that the magnetic glass board
will remain easy to wipe and free of smudges and other residue when using SIGEL accessories and following our instructions for use. This
guarantee does not apply in cases of mistreatment, negligence, incorrect usage or other methods of utilisation that do not comply with the
enclosed instructions.
MAGNETS
→ Due to the thickness of the glass, only the enclosed SuperDym neodymium magnets or other extra-strong magnets can be used.
→ If the distance between them is too small (< 10 cm), the magnets can collide, causing the magnetic coating to chip or the magnets
to splinter.
→ Danger of injury: fingers or skin can be squashed between two magnets, resulting in bruising.
→ Magnets create a strong, far-reaching magnetic field. There is a risk of damage to cards with a magnetic strip, electronic applian-
ces (data carriers, mobile phones, computer, monitors, etc.), mechanical watches and hearing aids.
→ People with pacemakers and heart defibrillator implants should avoid magnetic fields.
→ Magnets are not a toy! Keep them out of the reach of children – small parts are a choking hazard.

DISPOSAL AND RECYCLING

When your magnetic glass board has reached the end of its life cycle, ensure that you dispose of it safely and correctly after disassembly. The
magnetic glass board and its packaging should be disposed of in compliance with local waste disposal regulations and environmental laws.
Dispose of recyclable materials properly and in an environmentally friendly way. The packaging is made of plastic and cardboard, and should
be recycled separately. For further information about waste disposal, contact your local authority.
7