oneConcept Streamo Chef Mode D'emploi page 48

EN
48
Check Network when Power On
Enable / disable WiFi network.
When you enable the WiFi network, the system will automatically search
the available AP. Select you required AP. Enter WEP or WPA code to connect
the WIFI. If the wireless network connection is not existed or failed, the icon
at the top left corner will have a cross on it.
Date and Time
The date and time settings can only be made if the Internet radio is
connected to a wireless network.
Setup the date and time: The internet radio takes the date and time
automatically from a central server once a network connection has been
established. However, you will need to change the time manually to account
for the change from winter time to summer time.
• Set time format display as 12 Hour or 24 Hour.
• Set date format in the positions of YY (year), MM (month) and DD (day )-
• YY/MM/DD, DD/MM/YY or MM/DD/YY.
• Turn on/off the Daylight Saving Time (DST).
• Confirm with Enter or by pressing the reel.
With a wireless network connected , GMT (+01:00) time is a time reference
of time setting . Add or deduce the hour according to your time zone when
you set the time.
Alarm
There are three independent alarms – 2 alarms of absolute time setting
(Alarm 1 and Alarm 2) and 1 alarm for relative time setting (NAP Alarm ).
Select Alarm in the menu.