Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Liens rapides

Publicité

Table des Matières
loading

Sommaire des Matières pour Captiva POWER STARTER I53-381

  • Page 3: Table Des Matières

    Contents Control Center .................39 Tastatur Hintergrundlicht-LED ............42 About this Concise User Guide ............1 Start-Menü, Kontextmenü, Taskleiste, Systemsteuerung und System Startup ..................4 Einstellungen von Windows 10 ............43 Intel® Optane™ ................5 Grafikfunktionen ................44 System Map: Front View with LCD Panel Open ......7 Audiofunktionen ................45 LED Indicators ..................8 Energieoptionen ................45...
  • Page 4 Sommario TPM (Option) ..................75 Informazioni su questa guida rapida ..........105 Dépannage ..................76 Guida di avvio rapido ..............108 Spécifications ..................77 Intel® Optane™ ................109 Descrizione del sistema: Vista anteriore con pannello LCD Contenidos aperto ....................111 Indicatori LED ................112 Acerca de esta Guía del Usuario Concisa ........79 Tastiera ..................113 Guía rápida para empezar ...............82 Descrizione del sistema: Vista anteriore, sinistra e destra ....115...
  • Page 5: About This Concise User Guide

    About this Concise User Guide This quick guide is a brief introduction to getting your system started. This is a supplement, and not a substitute for the expanded English language User’s Manual in Adobe Acrobat format on the Device Drivers & Utilities + User’s Manual disc supplied with your computer.
  • Page 6: Instructions For Care And Operation

    Instructions for Care and Operation Safety Information • Only use an AC/DC adapter approved for use with this computer. The computer is quite rugged, but it can be damaged. To pre- • Use only the power cord and batteries indicated in this manual. vent this, follow these suggestions: Do not dispose of batteries in a fire.
  • Page 7 Polymer Battery Precautions Note the following information which is specific to polymer batteries only, and where applicable, this overrides the general battery precaution information. • Polymer batteries may experience a slight expansion or swelling, however this is part of the battery’s safety mechanism and is not a cause for concern.
  • Page 8: System Startup

    System Startup 1. Remove all packing materials. ゚ 2. Place the computer on a stable surface. 3. Securely attach any peripherals you want to use with the computer (e.g. keyboard and mouse) to their ports. 4. When first setting up the computer use the following procedure (as to safeguard the computer during shipping, the battery will be locked to not power the system until first connected to the AC/DC adapter and initially set up as below):...
  • Page 9: Intel® Optane

    Intel® Optane™ 4. Press Esc to exit the menu and go to the Main menu. 5. Select OffBoard NVMe Controller Configuration and press Intel® Optane™ is a combination of a compatible mem- Enter to check that an Intel® Optane™ SSD is present. ory device and Intel Rapid Storage Technology soft- 6.
  • Page 10: Disabling Intel® Optane

    17. Click Enable. Disabling Intel® Optane™ If you wish to disable an existing Intel® Optane™ setup then follow the procedure below to do so. 1. Run the Intel® Rapid Storage Technology application. 2. Click Disable. 3. Click Yes when the message pops up. 4.
  • Page 11: System Map: Front View With Lcd Panel Open

    System Map: Front View with LCD Panel Open Figure 3 2 1 3 Front View with LCD Panel Open 1. PC Camera 2. *Camera LED *When the camera is in use, the LED will be illuminated. 3. Built-In Array Microphone 4.
  • Page 12: Led Indicators

    LED Indicators The LED indicators on the computer display helpful information about the current status of the computer. Icon Color Description Orange The AC/DC Adapter is Plugged In Green The Computer is On Blinking Green The Computer is in Sleep Mode Orange The Battery is Charging Green...
  • Page 13: Keyboard

    Keyboard The keyboard has a numeric keypad for easy numeric data input. Pressing Num Lk turns on/off the numeric keypad. It also features function keys to allow you to change operational features instantly. Function Keys Num Lk & Scr Lk Numeric Keypad Menu/Application Key...
  • Page 14: Function Keys & Visual Indicators

    Function Keys & Visual Indicators The function keys (F1 - F12 etc.) will act as hot keys when pressed while the Fn key is held down. In addition to the basic function key combinations, some visual indicators are available when the Control Center driver is installed. Keys Function/Visual Indicators Keys...
  • Page 15: System Map: Front, Left & Right Views

    Front, Left & Right Views System Map: Front Left Right  Figure 5 - Front, Left & Right Views 1. LED Indicators 7. USB 3.1 Gen 2 Type-C Port *Thunderbolt Port Power 2. DC-In Jack Adapter Support (Factory Option) * Thunderbolt 3 Port 3.
  • Page 16: System Map: Bottom & Rear Views

    System Map: Bottom & Rear Views Figure 6 Bottom & Rear Views 1. Vent 2. Speakers  Bottom Cover Removal Warning Do not remove any cover(s) and/or screw(s) for the purpos- es of device upgrade as this may violate the terms of your warranty.
  • Page 17: Control Center

    Control Center Press the Fn + Esc key combination, or double-click the icon in the notification area of the taskbar to toggle the Control Center on/off. The Control Center gives quick access to frequently used controls and enables you to quickly turn the camera/Touchpad on/off.
  • Page 18: Power Modes

    Power Modes Power Status (Basic Setting) The Power Status icon will show whether you are cur- You can set a Power Mode by clicking the appropriate rently powered by the battery, or by the AC/DC adapter icon in the center of the Control Center. Each power plugged in to a working power outlet.
  • Page 19 Fan Speed (Basic Setting) You can set the fan speed to Maximum (full power) or Automatic from this menu item. The fan speed will adjust itself automatically to control the heat of the CPU. You can use the Offset slider to adjust the settings to your pref- erence.
  • Page 20: Keyboard Backlight Led

    Keyboard Backlight LED Press Fn plus the key to toggle the keyboard LED on/off. The Keyboard LED Function key Combinations keyboard LED may be configured using the Fn + key combination Launch the Keyboard Backlight Application Fn + outlined in Table 3.
  • Page 21: Windows 10 Start Menu, Context Menu, Taskbar, Control Panel And Settings

    Windows 10 Start Menu, Context Menu, Taskbar, Control Panel and Settings Most of the apps, control panels, utilities and programs within Windows 10 can be accessed from the Start Menu by clicking the icon in the taskbar in the lower left corner of the screen (or by pressing the Windows Logo Key the keyboard).
  • Page 22: Video Features

    Video Features Display Devices Note that you can use external displays connected to the The system features an Intel integrated GPU. You can HDMI-Out port and/or Mini DisplayPort. See your dis- switch display devices, and configure display options, play device manual to see which formats are supported. from the Display control panel in Windows as long as the video driver is installed.
  • Page 23: Audio Features

    Audio Features Power Options You can configure the audio options on your computer The Power Options (Hardware and Sound menu) con- from the Sound control panel in Windows. trol panel icon in Windows allows you to configure power management features for your computer. You can con- The volume may be adjusted by means of the Fn + F5/F6 serve power by means of power plans and configure the key combination.
  • Page 24: Driver Installation

    Driver Installation  The Device Drivers & Utilities + User’s Manual disc contains the drivers and utilities Driver Installation General necessary for the proper operation of the computer. This setup will probably have al- Guidelines ready been done for you. If this is not the case, insert the disc and click Install Drivers (button), or Option Drivers (button) to access the Optional driver menu.
  • Page 25: Windows Hello Camera (Option)

    Windows Hello Camera (Option) 10. The system will then prompt with “All Set!”, so click Close to exit the Setup Wizard. The Windows Hello camera is compatible with the Win- 11. Restart the computer after the scanning process has been dows Hello facial recognition system.
  • Page 26: Fingerprint Reader (Option)

    Fingerprint Reader (Option) Fingerprint Module Configuration 1. Click the Settings item in the Start Menu. Enroll your fingerprints as instructed below before use. 2. Click Accounts and then click Sign-in options. The fingerprint reader module uses the Sign-in options 3. You will need to add a Windows password (click Add under configuration of the Windows Account.
  • Page 27: Tpm

    3. Click TPM Administration. Figure 15 Before setting up the TPM (Trusted Platform Module) BitLocker Drive functions you must initialize the security platform. Encryption (TPM Admini- Activating TPM stration) 1. Restart the computer. 4. The TPM Management window allows you to configure the TPM 2.
  • Page 28: Troubleshooting

    Troubleshooting Problem Possible Cause - Solution Wireless LAN/Bluetooth The modules are off as the computer is in Airplane Mode. Check the LED indicator to see if it is in Airplane Mode (see Table 1 on page 8). Use the Fn + F11 key modules cannot be detected.
  • Page 29: Specifications

    Specifications BIOS Keyboard 128Mb SPI Flash ROM Full-size Keyboard (with Embedded  Numeric Keypad) Insyde BIOS Memory Latest Specification Information (Factory Option) Multi-Color Illuminated Dual Channel DDR4 Full-size Keyboard (with Embedded The specifications listed in this sec- Two 260 Pin SO-DIMM Sockets Numeric Keypad) tion are correct at the time of going to Supporting DDR4 2400MHz or DDR4...
  • Page 30 Communication Interface Environmental Spec Built-In 10/100/1000Mb Base-TX Ethernet One USB 3.1 Gen 2 Type-C Port* Temperature ° ° *The maximum amount of current supplied Operating: 5 C - 35 1.0M HD Camera Module by USB Type-C ports is 500mA (USB 2.0)/ Non-Operating: -20°C - 60°C 1500mA (USB 3.1).
  • Page 31: Über Das Ausführliche Benutzerhandbuch

    Über das Ausführliche Benutzerhandbuch Diese Kurzanleitung soll einen Überblick über die Schritte geben, die dazu notwendig sind, das System zu starten. Dieses ist nur eine Ergänzung und kein Ersatz für das erweiterte englischsprachige Benutzerhandbuch, das auf der mitgelieferten Disc Device Drivers & Utilities + User's Manual im Adobe-Acrobat-Format vorliegt. Diese Disc enthält auch die Treiber und Utility-Programme, die für einen einwandfreien Betrieb des Computers notwendig sind (Hinweis: Das Unternehmen behält sich das Recht vor, diese Publikation ohne Vorankündigung zu überarbeiten und den Inhalt zu verändern).
  • Page 32: Sicherheitsinformationen

    Hinweise zu Pflege und Betrieb • Wenn der Computer heruntergefallen ist oder beschädigt wurde (berüh- ren Sie nicht die giftige Flüssigkeit des LCD-Bildschirms). Das Notebook ist zwar sehr stabil, kann aber dennoch be- • Wenn ein ungewöhnlicher Geruch, Hitze oder Rauch aus dem Computer schädigt werden.
  • Page 33 Polymer Akku Sicherheitshinweise Beachten Sie die folgenden Hinweise, die sich speziell auf Poly- mer Akkus beziehen. Diese Hinweise haben zudem Vorrang gegenüber den Allgemeinen Akku Sicherheitshinweisen. • Polymer Akkus können sich etwas ausdehnen oder anschwellen. Dies ist Teil des Sicherheitsmechanismus des Akkus und kein Anlass zur Sorge. •...
  • Page 34: Schnellstart

    Schnellstart 1. Entfernen Sie das gesamte Verpackungsmaterial. ゚ 2. Legen Sie den Computer auf eine stabile Unterlage. 3. Schließen Sie alle Peripheriegeräte, die Sie mit dem Computer verwenden wollen (z. B. Tastatur und Maus), an die entsprechenden Schnittstellen an. 4. Gehen Sie bei der erstmaligen Einrichtung des Computers wie folgt vor (um den Computer während des Versands zu schützen, wird der Akku das System nicht mit Strom versorgen, bis es das erste Mal mit dem AC/DC- Adapter verbunden und wie folgt erstmalig eingerichtet worden ist):...
  • Page 35: Intel® Optane

    Intel® Optane™ 3. Wählen Sie UEFI Boot, drücken Sie auf die Eingabetaste und wählen Sie “Enabled”. Intel® Optane™ ist eine Kombination aus einem kompa- 4. Drücken Sie auf Esc um das Menü zu verlassen und gehen Sie tiblen Speichergerät und Intel® Rapid Storage-Technolo- zum Menü...
  • Page 36: Intel® Optane™ Deaktivieren

    Intel® Optane™ deaktivieren 15. Installieren Sie die Windows-Treiber (siehe Seite 46). Sollten Sie den Intel® Rapid Storage-Technologie (IRST) Treiber Wenn Sie eine bestehende Intel® Optane™ Einrichtung Installieren. deaktivieren möchten, gehen Sie wie folgt vor. 16. Starten Sie die Intel® Rapid Storage-Technologie Anwendung. 17.
  • Page 37: Systemübersicht: Ansicht Von Vorne Mit Geöffnetem Lcd-Bildschirm

    Systemübersicht: Ansicht von vorne mit geöffnetem LCD-Bildschirm Abb. 3 2 1 3 Ansicht von vorne mit geöffnetem LCD- Bildschirm 1. PC-Kamera 2. *LED der Kamera *Wenn die Kamera verwendet wird, leuchtet die LED. 3. Eingebautes Array-Mikrofon 4. LCD-Bildschirm 5. Netzschalter 6.
  • Page 38: Led-Anzeigen

    LED-Anzeigen Die LED-Anzeigen auf dem Computer zeigen wichtige Informationen über den aktuellen Status des Computers. Symbol Farbe Beschreibung Orange Der AC/DC-Adapter ist angeschlossen Grün Der Computer ist angeschaltet Lampe blinkt grün Das System ist im konfigurierten Energiesparmodus Orange Der Akku wird geladen Grün Der Akku ist voll geladen Lampe blinkt orange...
  • Page 39: Tastatur

    Tastatur Die Tastatur hat eine eingebettete Nummerntastatur für einfache Zahleneingabe. Durch Drücken auf Num wird die Nummerntastatur ein- und ausgeschaltet. Zusätzlich gibt es Funktionstasten, über die Sie direkt zwischen den Funktionen um- schalten können. Num & Funktionstasten Rollen Nummemtastatur Menü/Anwendungstaste Fn Taste Windows-Logo-Taste (Werkseitige Option) Beleuchtete Multicolor Tastatur...
  • Page 40: Funktionstasten & Visuelle Anzeigen

    Funktionstasten & visuelle Anzeigen Wenn die Funktionstasten (F1 - F12) gleichzeitig mit der Fn-Taste gedrückt werden, funktionieren sie wie Hotkeys. Neben den Tastenkombinationen für die Grundfunktionen gibt es einige visuelle Anzeigen, wenn der Control Center-Treiber in- stalliert ist. Tasten Funktion/ Visuelle Anzeigen Tasten Funktion/ Visuelle Anzeigen Flugzeugmodus ein-/...
  • Page 41: Systemübersicht: Ansicht Von Vorne, Links Und Rechts

    Systemübersicht: Ansicht von vorne, links und rechts Vorderseite Linke Seite Rechte Seite  Abb. 5 - Ansicht von vorne, links und rechts Rear *Thunderbolt Anschluss Netzteil 1. LED-Anzeigen 7. USB 3.1 Gen 2 Typ-C Anschluss Unterstützung Oder 2. DC-Eingangsbuchse Systeme, die einen Thunderbolt (Werkseitige Option) 3.
  • Page 42: Systemübersicht: Ansicht Von Unten Und Hinten

    Systemübersicht: Ansicht von unten und hinten Abb. 6 Ansicht von unten und hinten 1. Luftungsoffnung 2. Lautsprecher  Überhitzung Zum Schutz vor Überhitzung Ihres Computers dürfen die Luftungsoff- nung(en) nicht während Notebook in Betrieb ist verdeckt wer- den. Keine Gehäuseteile entfernen oder öffnen Entfernen Sie keine Gehäuseteile und/oder Schrauben, um das Gerät...
  • Page 43: Control Center

    Control Center Drükken Sie auf die Tastenkombination Fn + Esc, oder doppelklicken Sie auf das Symbol im Infobereich auf der Taskleiste um das Control Center ein-/auszuschalten. Das Control Center bietet den schnellen Zugriff auf häufig ver- wendete Funktionen, und Sie haben hier die Möglichkeit, das Touchpad/das Kamera-Modul direkt ein-/auszuschalten. Control Center Menüs Das Control Center umfasst zwei Menütitel (Grundeinstellung und Extra Einstellung).
  • Page 44 Energiemodi Energiestatus (Grundeinstellung) Das Energiestatus-Symbol zeigt an, ob die Stromversor- Sie können einen Energiemodus einstellen, indem Sie in der gung aktuell über den Akku oder über das an das Stromnetz Mitte des Control Centers auf das entsprechende Symbol angeschlossene Netzteil erfolgt. Die Energiestatus-Anzeige klikken.
  • Page 45 Lüftergeschwindigkeit (Grundeinstellung) In diesem Menü können Sie die Lüftergeschwindigkeit auf Maximal (volle Leistung) oder Automatisch stellen. Die Lüftergeschwindigkeit wird sich automatisch einstellen, um die Temperatur der CPU zu regeln. Mit dem Regler "Versatz" können Sie die Einstellungen nach Ihren Wün- schen anpassen.
  • Page 46: Tastatur Hintergrundlicht-Led

    Tastatur Hintergrundlicht-LED Drücken Sie auf die Fn- und die -Taste, um die Tastatur-LED Tastatur-LED Funktionstastenkombinationen ein-/auszuschalten. Tastatur-LED kann einer Startet die Anwendung für das Tastatur-Hinter- Tastenkombination aus Fn + beliebiger Taste wie in Tabelle 3 bes- Fn + grundlicht chrieben konfiguriert werden. Drücken Sie die Fn-Taste gleichzeitig Fn + Tastatur-LED ein-/auszuschalten mit der...
  • Page 47: Start-Menü, Kontextmenü, Taskleiste, Systemsteuerung Und Einstellungen Von Windows 10

    Start-Menü, Kontextmenü, Taskleiste, Systemsteuerung und Ein- stellungen von Windows 10 Auf die meisten Apps, Control Panels, Utilities und Programme in Windows 10 können Sie über das Start-Menü gelangen. Klicken Sie dazu auf das Symbol in der Taskleiste in der linken unteren Ecke des Bildschirms (oder drücken Sie auf die Windows-Logo-Taste der Tastatur).
  • Page 48: Grafikfunktionen

    Grafikfunktionen Anzeigegeräte Beachten Sie, dass Sie externe Anzeigen nutzen können, die Dieses System verfügt über eine integrierte GPU von Intel. an den HDMI-Ausgangsanschluss und/oder an den Mini Wenn der Grafiktreiber installiert ist, können Sie bei DisplayPort Anschluss angeschlossen sind. Lesen Sie die Windows im Einstellfenster Anzeige die Anzeigegeräte Anleitung des Anzeigegerätes, um zu erfahren, welche For- wechseln und Anzeigeoptionen konfigurieren.
  • Page 49: Audiofunktionen

    Audiofunktionen Energieoptionen Sie können die Audiooptionen für Ihren Computer über die Die Energieoptionen von Windows ermöglichen Ihnen die Systemsteuerung Sound in Windows konfigurieren. Konfiguration der Optionen für das Energiemanagement des Computers. Sie können Strom sparen, indem Sie Ener- Die Lautstärke können Sie durch die Tastenkombination Fn giesparpläne erstellen und im linken Menü...
  • Page 50: Installation Der Treiber

    Installation der Treiber  Die Disc Device Drivers & Utilities + User's Manual enthält die Treiber und Hilfspro- gramme, die für das einwandfreie Funktionieren des Computers notwendig sind. Möglicher- Allgemeine Hinweise zur Treiberinstallation weise wurden diese bereits vorinstalliert. Ist das nicht der Fall, legen Sie die Disc ein, und klicken Sie auf Install Drivers (Schaltfläche) oder Option Drivers (Schaltfläche), um das Wenn Sie keine fortge- schrittenen...
  • Page 51: Windows Hello Kamera (Option)

    Windows Hello Kamera (Option) 9. Schauen Sie direkt auf den Bildschirm, damit das System Ihr Gesicht scannen kann (die blaue Leiste unter dem Bild zeigt den Die Windows Hello Kamera ist kompatibel mit dem Fortschritt des Scans an). Windows Hello Gesichtserkennung System. Die Windows 10.
  • Page 52: Fingerabdruckleser (Option)

    Fingerabdruckleser (Option) Fingerabdruckmodulkonfiguration 1. Klicken Sie auf den Eintrag Einstellungen im Startmenü. Melden Sie Ihre Fingerabdrücke vor dem Benutzen wie un- 2. Klicken Sie dann auf Konten und klicken Sie auf ten beschrieben an. Das Fingerabdrucklesemodul verwendet Anmeldeoptionen. die Anmeldeoption Konfiguration des Windows Kontos. 3.
  • Page 53: Tpm (Option)

    TPM (Option) Abb. 15 Bevor Sie die TPM (Trusted Platform Module)-Funktionen Laufwerk- BitLocker- einrichten, müssen Sie die Sicherheitsplattform initialisie- verschlüsselung ren. (TPM-Verwaltung) Aktivieren der TPM-Funktionen 4. Im Fenster TPM-Verwaltung können Sie TPM unter Windows verwalten. Da ein TPM normalerweise in großen Unternehmen 1.
  • Page 54: Fehlerbehebung

    Fehlerbehebung Problem Mögliche Ursache - Lösung Die Module Wireless-LAN/ Im Flugzeugmodus sind die Module ausgeschaltet. Prüfen Sie der LED-Anzeige , ob der Bluetooth können nicht erkannt Computer im Flugzeugmodus ist (siehe Tabelle 1 auf Seite 34). Mit der Tastenkombination werden. Fn + F11 können Sie den Flugzeugmodus ein- oder ausschalten (siehe Tabelle 2 auf Seite 36).
  • Page 55: Technische Daten

    Technische Daten BIOS Tastatur Insyde BIOS (128Mb SPI Flash-ROM) Tastatur in Originalgröße (mit  Nummerntastatur) Speicher Oder Aktualität der technischen Daten Dual Channel DDR4 (Werkseitige Option) Beleuchtete Zwei 260-Pin SODIMM-Sockel Die in diesem Teil aufgeführten techni- Multicolor Tastatur in Originalgröße (mit Unterstützung von DDR4 2400MHz oder schen Daten sind zum Zeitpunkt der Nummerntastatur)
  • Page 56 Kommunikation Schnittstellen Umgebungsbedingungen Eingebautes 10/100/1000Mb Base-TX Ein USB 3.1 Gen 2 Typ-C Anschluss* Temperatur Ethernet LAN *Die maximale Strommenge, die von USB In Betrieb: 5ºC – 35ºC 1,0M HD Kamera-Modul Typ-C Anschlüssen geliefert wird, beträgt Bei Aufbewahrung: -20ºC – 60ºC 500mA (USB 2.0)/1500mA (USB 3.1).
  • Page 57: A Propos De Ce Guide Utilisateur Concis

    A propos de ce Guide Utilisateur Concis Ce guide rapide est une brève introduction à la mise en route de votre système. Il s’agit d’un supplément, et non pas d’une alternative au Manuel de l’Utilisateur en Anglais complet au format Adobe Acrobat sur le disque Device Drivers & Utilities + User's Manual fourni avec votre ordinateur.
  • Page 58: Instructions D'entretien Et D'utilisation

    Instructions d’entretien et d’utilisation • Si une odeur inhabituel, de la chaleur ou de la fumée apparaissait sor- tant de votre ordinateur. L’ordinateur est robuste, mais il peut toutefois être endomma- gé. Afin d’éviter ceci, veuillez suivre ces recommandations : Informations de sécurité...
  • Page 59 Précautions concernant les batteries polymères Notez les informations suivantes spécifiques aux batteries po- lymères, et le cas échéant, celles-ci remplacent les informa- tions générales de précaution sur les batteries. • Les batteries polymères peuvent présenter une légère dilatation ou gonflement, mais cela est inhérent au mécanisme de sécurité de la batterie et ne représente pas une anomalie.
  • Page 60: Guide De Démarrage Rapide

    Guide de démarrage rapide ゚ 1. Enlevez tous les memballages. 2. Posez l’ordinateur sur une surface stable. 3. Connectez fermement les périphériques que vous souhaitez utiliser avec votre ordinateur (par ex. clavier et souris) à leurs ports respectifs. 4. Lors de la première installation de l'ordinateur utilisez la procédure suivante (afin de protéger l'ordinateur, la batterie sera verrouillée lors de l'expédition afin de ne pas alimenter le système avant la première connexion à...
  • Page 61: Intel® Optane

    Intel® Optane™ 5. Sélectionnez OffBoard NVMe Controller Configuration et appuyez sur Entrée pour vérifier qu'un SSD Intel® Optane™ est Intel® Optane™ est la combinaison d'un périphérique de présent. mémoire compatible et du logiciel Technologie de stockage 6. Appuyez sur Échap pour sortir du menu et allez au menu Advanced.
  • Page 62: Désactivation De Intel® Optane

    Désactivation de Intel® Optane™ 17. Cliquez sur Activer. Si vous souhaitez désactiver une configuration Intel® Op- tane™ existante, suivez la procédure ci-dessous pour le faire. 1. Exécutez l'application Technologie de stockage Intel® Rapid. 2. Cliquez sur Désactiver. 3. Cliquez sur Oui lorsque le message s'affiche. Figure 2 - Technologie de stockage Intel®...
  • Page 63: Carte Du Système: Vue De Face Avec L'écran Lcd Ouvert

    Carte du système: Vue de face avec l’écran LCD ouvert Figure 3 2 1 3 Vue de face avec l’écran LCD ou- vert 1. Caméra PC 2. *Indicateur LED de caméra *Quand la caméra est en cours d'utilisation le Indicateur LED sera illuminé.
  • Page 64: Indicateurs Led

    Indicateurs LED Les indicateurs LED sur votre ordinateur affichent des informations utiles sur l’état actuel de votre ordinateur. Icône Couleur Description Orange L'adaptateur AC/DC est branché Vert L’ordinateur est allumé Vert Le système est dans le mode de Veille configuré clignotant Orange La batterie est en charge...
  • Page 65: Clavier

    Clavier Le clavier est doté d'un pavé numérique intégré pour une saisie des données numériques plus facile. Le fait d'appuyer sur Verr Num active ou désactive le pavé numérique. Il est également doté de touches fonction pour vous permettre de changer instantanément de mode opérationnel.
  • Page 66: Touches Fonction & Indicateurs Visuels

    Touches fonction & indicateurs visuels Les touches de fonctions (F1 - F12 etc.) agiront comme touches de raccourci (hot-key) quand pressée en maintenant la touche Fn appuyée. En plus des combinaisons des touches de fonction de base, des indicateurs visuels sont disponibles quand le pi- lote Control Center est installé.
  • Page 67: Carte Du Système: Vues De Face, Gauche Et Droite

    Carte du système: Vues de face, gauche et droite Face Gauche Droit  Figure 5 - Vues de face, gauche et droite *Prise en charge de l'adaptateur 1. Indicateurs LED 7. Port USB 3.1 Gen 2 Type-C d'alimentation du port 2.
  • Page 68: Carte Du Système: Vues De Dessous Et Arrière

    Carte du système: Vues de dessous et arrière Figure 6 Vues de dessous et arrière 1. Ventilation 2. Haut-parleurs  Surchauffe Afin de ne pas causer une sur- chauffe de votre ordinateur, verifiez que rien ne bouche la (les) ventila- tion(s) quand le systeme est allu- mé.
  • Page 69: Control Center

    Control Center Appuyez sur la combinaison de touches Fn + Échap ou double-cliquez sur l'icône dans la zone de notification de la barre des tâches pour activer/désactiver le Control Center. Le Control Center donne un accès rapide aux commandes fré- quemment utilisées, et vous permet de rapidement d'activer/désactiver le touchpad/le module caméra.
  • Page 70: Modes D'alimentation

    Modes d’alimentation État d'alimentation (Paramètre de base) L'icône État d'alimentation indique si vous êtes actuelle- Vous pouvez définir un Mode d’alimentation en cliquant ment alimenté par la batterie, ou par l'adaptateur AC/DC sur l'icône appropriée au centre du Control Center. Chaque branché...
  • Page 71 Vitesse du ventilateur (Paramètre de base) Vous pouvez régler la vitesse du ventilateur sur Maximum (pleine puissance) ou Automatique à partir de cet élément du menu. La vitesse du ventilateur s'ajuste automatiquement pour contrôler la chaleur du CPU. Vous pouvez utiliser le curseur Décalage pour ajuster les paramètres selon vos pré- férences.
  • Page 72: Led Du Rétroéclairage Du Clavier

    LED du rétroéclairage du clavier Appuyez sur Fn plus sur la touche pour allumer/éteindre la Combinaisons de touches de fonction de LED du LED du clavier. La LED du clavier peut être configurée en utilisant clavier la combinaison Fn + touche décrites dans le Tableau 3.
  • Page 73: Menu Démarrer, Menu Contextuel, Barre Des Tâches, Panneau De Configuration Et Paramètres De Windows 10

    Menu Démarrer, Menu contextuel, Barre des tâches, Panneau de Configuration et Paramètres de Windows 10 La plupart des applications, panneaux de configuration, utilitaires et programmes dans Windows 10 sont accessibles depuis le Menu Démarrer en cliquant sur l'icône dans la barre des tâches dans le coin inférieur gauche de l'écran (ou en appuyant sur la Touche du logo Windows sur le clavier).
  • Page 74: Caractéristiques Vidéo

    Caractéristiques vidéo Périphériques d’affichage Vous pouvez utiliser des écrans externes connectés à la prise Le système comporte un GPU intégré Intel. Vous pouvez de sortie HDMI et/ou au Mini DisplayPort. Consultez le ma- permuter les dispositifs d'affichage et configurer les options nuel de votre périphérique d'affichage pour connaître les for- d'affichage depuis le panneau de contrôle Affichage dans mats pris en charge.
  • Page 75: Caractéristiques Audio

    Caractéristiques audio Options d’alimentation Vous pouvez configurer les options audio sur votre ordinateur Le panneau de configuration Options d'alimentation de à partir du panneau de configuration Son dans Windows. Windows vous permet de configurer la gestion d'alimenta- tion de votre ordinateur. Vous pouvez économiser de l'éner- Le volume peut être réglé...
  • Page 76: Installation Du Pilote

    Installation du pilote  Le disque Device Drivers & Utilities + User’s Manual contient les pilotes et les utilitaires nécessaires pour un bon fonctionnement de votre ordinateur. Cette installation aura proba- Directives générales pour l'installation du pilote blement déjà été faite pour vous. Si ce n'est pas le cas, insérez le disque et cliquez sur Install Drivers (bouton), ou Option Drivers (bouton) pour accéder au menu des pilotes Option- D'une manière...
  • Page 77: Caméra Windows Hello (Option)

    Caméra Windows Hello (Option) 9. Regardez directement l'écran de façon continue et le système scannera votre visage (la barre bleue sous votre image indique la La Caméra Windows Hello est compatible avec le système progression du scan). de Reconnaissance faciale de Windows Hello. La caméra 10.
  • Page 78: Lecteur D'empreintes Digitales (Option)

    Lecteur d'empreintes digitales Configuration du module d'empreinte di- gitale (Option) 1. Cliquez sur l'élément Paramètres dans le menu Démarrer. Enregistrez vos empreintes digitales comme indiqué ci-des- 2. Cliquez sur Comptes et cliquez sur Options de connexion. sus avant utilisation. Le module de lecteur d'empreintes digi- 3.
  • Page 79: Tpm (Option)

    TPM (Option) 3. Cliquez sur Administration du TPM. Figure 15 Avant de paramétrer les fonctions TPM (Module de plateforme Chiffrement de lecteur sécurisée) vous devez initialiser la plateforme de sécurité. BitLocker (Administration du TPM) Activer TPM 4. La fenêtre de gestion du TPM vous permet de configurer le TPM 1.
  • Page 80: Dépannage

    Dépannage Problème Cause possible - résolution modules sans fil/ Les modules sont désactivés quand l'ordinateur est en Mode Avion. Vérifiez l'indicateur LED Bluetooth ne peuvent pas être pour voir si l'ordinateur est en Mode Avion (voir le Tableau 1 à la page 60).
  • Page 81: Spécifications

    Spécifications BIOS Clavier Insyde BIOS (SPI Flash ROM de 128Mb) Clavier pleine taille (avec pavé numérique  intégré) Mémoire Dernières informations de Deux emplacements SODIMM 260 broches (Option d’usine) Clavier illuminé spécification multicolore pleine taille (avec pavé Compatible avec les modules mémoire Les spécifications énumérées dans cette numérique intégré) DDR4 2400MHz ou DDR4 2666MHz (selon...
  • Page 82 Communication Interface Spécifications environnementales LAN Ethernet 10/100/1000Mb Base-TX Un port USB 3.1 Gen 2 Type-C* Température ° ° intégré *La quantité maximale de courant fournie En fonction : 5 C- 35 par les ports USB Type-C est 500mA (USB ° °...
  • Page 83: Acerca De Esta Guía Del Usuario Concisa

    Acerca de esta Guía del Usuario Concisa Esta guía rápida es una breve introducción para poner su sistema en funcionamiento. Es un suplemento y no un sustituto del Manual del usuario completo en inglés en formato Adobe Acrobat del disco Device Drivers & Utilities + User's Manual suministrado con el ordenador.
  • Page 84: Instrucciones Para El Cuidado Y Funcionamiento

    Instrucciones para el cuidado y funcio- • Si hay un olor fuera de lo normal, calor o humo que sale del orde- nador. namiento Información de seguridad El ordenador portátil es muy robusto, pero puede dañarse. Para • Utilice solamente un adaptador de alimentación aprobado para su evitar esto, siga estas sugerencias: uso con este ordenador.
  • Page 85 Precauciones para baterías de polímero Tenga en cuenta la información siguiente específica para bate- rías de polímero; además, donde corresponda, invalida la infor- mación sobre precauciones para baterías normales. • Las baterías pueden aumentar o hincharse ligeramente, sin embargo, esto es parte del mecanismo de seguridad de la batería y o supone un problema.
  • Page 86: Guía Rápida Para Empezar

    Guía rápida para empezar 1. Quite todos los materiales del embalaje. ゚ 2. Coloque el ordenador en una superficie estable. 3. Conecte en los puertos correspondientes los periféricos que desee utilizar con el ordenador (p. ej. teclado y ratón). 4. Al configurar el ordenador por primera vez, siga este proceso (para proteger el ordenador durante el transporte, la batería será...
  • Page 87: Intel Optane

    Intel® Optane™ 4. Pulse Esc para salir del menú y vaya al menú Main. 5. Seleccione OffBoard NVMe Controller Configuration y pulse Intel® Optane™ es la combinación de un dispositivo de Entrar para comprobar si hay el SSD Intel® Optane™ está memoria compatible con el software Tecnología de presente.
  • Page 88: Desactivar Intel® Optane

    Desactivar Intel® Optane™ 17. Haga clic en Activar. Si desea desactivar una configuración de Intel® Optane™ siga el procedimiento que se describe a continuación. 1. Ejecute la aplicación Tecnología de almacenamiento Intel® Rapid. 2. Haga clic en Desactivar. 3. Haga clic en Sí cuando aparezca el mensaje. Figura 2 - Tecnología de almacenamiento Intel®...
  • Page 89: Mapa Del Sistema: Vista Frontal Con Panel Lcd Abierto

    Mapa del sistema: Vista frontal con panel LCD abierto Figura 3 Vista frontal con panel LCD abierto 2 1 3 1. Cámara PC 2. *LED de cámara *Cuando la cámara esté en uso, el LED se iluminará. 3. Micrófono en línea incorporado 4.
  • Page 90: Indicadores Led

    Indicadores LED Los indicadores LED en su ordenador muestran una valiosa información sobre el estado actual del ordenador. Icono Color Descripción Naranja El adaptador AC/DC está conectado Verde El ordenador está encendido Verde parpa- El ordenador está en modo Suspensión deante Naranja La batería se está...
  • Page 91: Teclado

    Teclado El teclado tiene un teclado numérico para una entrada fácil de datos numéricos. Al presionar Bloq Num el teclado numérico se habilita o inhabilita. También incluye las teclas de función para permitirle cambiar las características operacionales al instante. Teclas de función Bloq Num &...
  • Page 92: Teclas De Función & Indicadores Visuales

    Teclas de función & indicadores visuales Las teclas de función (F1 - F12 etc.) actuarán como teclas directas (Hot-Key) cuando se pulsan junto con la tecla Fn. Además de las combinaciones de teclas de función básicas algunos indicadores visuales están disponibles cuando el controlador de Control Center está...
  • Page 93: Mapa Del Sistema: Vistas Frontal, Izquierda Y Derecha

    Mapa del sistema: Vistas frontal, izquierda y derecha Parte frontal Lateral izquierdo Lateral derecho  Figura 5 - Vistas frontal, izquierda y derecha *Soporte para adaptador de puerto 1. Indicadores LED 7. Puerto USB 3.1 Gen 2 Tipo-C Thunderbolt 2. Conector de entrada DC (Opción de fábrica) *Puerto 3.
  • Page 94: Mapa Del Sistema: Vistas Inferior Y Posterior

    Mapa del sistema: Vistas inferior y posterior Figura 6 Vistas inferior y posterior 1. Rejilla 2. Altavoces  Recalentamiento Para evitar que su ordenador se reca- liente compruebe que nada bloquea la(s) rejilla(s) con el equipo encendi- Advertencia sobre quitar la tapa inferior No quite ninguna tapa y/o tornillo para actualizar el dispositivo, pues podría...
  • Page 95: Control Center

    Control Center Presione la combinación de teclas Fn + Esc o haga doble clic en el icono en el área de notificación de la barra de tareas para activar o desactivar el Control Center. El Control Center ofrece un acceso rápido a los controles usados con más frecuencia y le permite activar, y desactivar el touchpad/el módulo cámara rápidamente.
  • Page 96 Modos de energía Estado de energía (Configuración básica) El icono Estado de energía mostrará si la alimentación Puede ajustar el Modo de energía haciendo clic en el icono actual viene dada por la batería o por el adaptador AC/DC apropiado en el centro del Control Center. Cada modo de enchufado en una toma de corriente.
  • Page 97 Velocidad del ventilador (Configuración básica) Desde este elemento del menú puede ajustar la velocidad del ventilador a Máximo (potencia máxima) o Automático. Esto ajustará la velocidad del ventilador automáticamente para controlar el calor de la CPU. Puede usar el control deslizante Desplazamiento para ajustar la configuración según sus preferencias.
  • Page 98: Led De Retroiluminación Del Teclado

    LED de retroiluminación del teclado Presione Fn y la tecla para encender o apagar el LED del Combinaciones de teclas para la función LED del teclado. El LED del teclado puede configurarse usando la teclado combinación Fn + tecla según la Tabla Además, presione Fn más Abre la aplicación Retroiluminación de...
  • Page 99: Menú Inicio, Menú Contextual, Barra De Tareas, Panel De Control Y Configuración De Windows 10

    Menú Inicio, Menú contextual, Barra de tareas, Panel de Control y Configuración de Windows 10 Se puede acceder a la mayoría de las apps, paneles de control, utilidades y programas en Windows 10 desde el menú Inicio haciendo clic en el icono de la barra de tareas en la esquina inferior izquierda de la pantalla (o pulsando la Tecla del logotipo de Windows en el teclado).
  • Page 100: Parámetros De Vídeo

    Parámetros de vídeo Dispositivos de pantalla Tenga en cuenta que puede usar pantallas externas El sistema incluye una GPU integrada de Intel. Puede conectadas al puerto de salida de HDMI y/o al puerto Mini cambiar los dispositivos de pantalla y configurar las DisplayPort.
  • Page 101: Características De Audio

    Características de audio Opciones de energía Puede configurar las opciones de audio de su ordenador en el El panel de control de las opciones de energía (menú panel de control Sonido en Windows. Hardware y sonido) de Windows permite configurar las funciones de administración de energía del ordenador.
  • Page 102: Instalación De Controladores

    Instalación de controladores  El disco Device Drivers & Utilities + User’s Manual contiene los controladores y utilitarios necesarios para utilizar el ordenador correctamente. Inserte el disco y haga clic en Install Directrices generales para la instalación del Drivers (botón), u Option Drivers (botón) para acceder al menú de controladores opcional. controlador Instale los controladores en el orden indicado en la Figura...
  • Page 103: Cámara Windows Hello (Opción)

    Cámara Windows Hello (Opción) 8. Necesitará escribir el número pin en la primera configuración. 9. Mantenga la vista directa sobre la pantalla y el sistema escaneará La cámara Windows Hello es compatible con el sistema de su cara (la barra azul bajo su imagen indica el progreso del Reconocimiento de caras de Windows Hello.
  • Page 104: Lector De Huellas Digitales (Opción)

    Lector de huellas digitales Configuración del módulo de huellas di- gitales (Opción) 1. Haga clic en la opción Configuración en el menú Inicio. Registre sus huellas digitales como se describe a 2. Haga clic en Cuentas y haga clic en Opciones de inicio de continuación antes de usarlo.
  • Page 105: Tpm (Opción)

    TPM (Opción) 3. Haga clic en Administración de TPM. Figura 15 Antes de configurar las funciones del TPM (Módulo de Cifrado de unidad plataforma segura) deberá iniciar la plataforma de seguridad. BitLocker (Administración de Activar TPM TPM) 1. Reinicie el ordenador. 4.
  • Page 106: Solución De Problemas

    Solución de problemas Problema Posible causa - Solución Los módulos WLAN y Los módulos están apagados cuando el equipo está en Modo Avión. Compruebe el indicador Bluetooth no pueden para ver si el equipo está en Modo Avión (vea la Tabla 1 en la página 86).
  • Page 107: Especificaciones

    Especificaciones BIOS Teclado Insyde BIOS (SPI Flash ROM de 128Mb) Teclado de tamaño completo (con teclado  numérico incorporado) Memoria DDR4 de doble canal Información actualizada de (Opción de fábrica) Teclado iluminado especificaciones Dos zócalos de 260 contactos SODIMM multicolor de tamaño completo (con teclado Soporta módulos de memoria DDR4 numérico incorporado) Las especificaciones listadas en esta...
  • Page 108 Comunicaciones Interfaz Especificaciones del ambiente 10/100/1000Mb Base-TX Ethernet LAN Un puerto USB 3.1 Gen 2 Tipo-C* Temperatura incorporada *La cantidad máxima de corriente En funcionamiento: 5°C - 35°C Módulo cámara 1,0M HD suministrada por los puertos USB Tipo-C es Apagado: -20°C - 60°C 500mA (USB 2.0)/1500mA (USB 3.1).
  • Page 109: Informazioni Su Questa Guida Rapida

    Informazioni su questa guida rapida Questa guida rapida rappresenta un’introduzione rapida all’avvio del sistema. Si tratta di un supplemento e non di una sostituzione del Manuale per l'utente completo in lingua inglese nel formato Adobe Acrobat, memorizzato sul disco Device Drivers &...
  • Page 110: Istruzioni Per La Custodia E Il Funzionamento

    Istruzioni per la custodia e il funziona- • Se c'è un odore non usuale, calore o fumo che fuoriesce dal compu- ter. mento Informazioni di sicurezza Il computer notebook è abbastanza rigido, ma è possibile che possa essere danneggiato. Per evitare qualsiasi danno, attenersi •...
  • Page 111 Precauzioni relative alla batteria ai polimeri Le informazioni seguenti sono molto importanti e si riferiscono unicamente alle batterie ai polimeri e, ove applicabile, hanno priorità rispetto alle precauzioni generali relative alle batterie. • Le batterie ai polimeri possono espandersi o gonfiarsi leggermente, tuttavia questo fa parte del meccanismo di sicurezza della batteria e non deve essere causa di preoccupazione.
  • Page 112: Guida Di Avvio Rapido

    Guida di avvio rapido 1. Eliminare tutti i materiali di imballo. ゚ 2. Appoggiare il computer su una superficie stabile. 3. Collegare bene le periferiche che si desidera usare con il computer (per esempio tastiera e mouse) alle porte corrispondenti. 4.
  • Page 113: Intel® Optane

    Intel® Optane™ 5. Selezionare OffBoard NVMe Controller Configuration e premere Invio per verificare che una memoria SSD Intel® Intel® Optane™ è una combinazione di un dispositivo di Optane™ sia presente. memoria compatibile e di un software Tecnologia Intel® 6. Premere Esc per uscire dal menu e aprire il menu Advanced. 7.
  • Page 114 Disabilitazione Intel® Optane™ 17. Fare clic su Attiva. Se si desidera disattivare un'installazione Intel® Optane™ esistente, seguire la procedura riportata di seguito. 1. Eseguire la applicazione Tecnologia Intel® Rapid Storage. 2. Fare clic su Disattiva. 3. Fare clic su Sì quando viene visualizzato il messaggio. Figura 2 - Tecnologia Intel®...
  • Page 115: Descrizione Del Sistema: Vista Anteriore Con Pannello Lcd Aperto

    Descrizione del sistema: Vista anteriore con pannello LCD aperto Figura 3 2 1 3 Vista anteriore con pannello LCD aperto 1. Camera PC 2. *LED della camera *Quando si utilizza la camera, l'indicatore LED si illumina. 3. Microfono array integrato 4.
  • Page 116: Indicatori Led

    Indicatori LED Gli indicatori LED sul computer segnalano importanti informazioni relative allo stato corrente del computer. Icona Colore Descrizione Arancione L'alimentatore è collegato Verde Il computer è ON Verde lampeggiante Il computer è in modalità Sospensione Arancione La batteria è in carica Verde Batteria completamente carica Arancione lampeggiante...
  • Page 117: Tastiera

    Tastiera Nella tastiera è stato integrato un tastierino numerico per un facile inserimento dei numeri. Premere Bloc Num per commutare l’attivazione e la disattivazione della tastiera numerica. Dispone anche di tasti funzione che consentono di cambiare istantaneamente le funzionalità operative. Tasti funzione Bloc Num &...
  • Page 118: Tasti Funzione E Indicatori Visivi

    Tasti funzione e indicatori visivi I tasti funzione (da F1 a F12) agiscono come Hot-Key quando premuti tenendo premuto il tasto Fn. In aggiunta alle combinazioni di tasti funzione base, quando è installato il driver Control Center alcuni indicatori visivi sono disponibili. Tasti Tasti funzione e indicatori visivi Tasti...
  • Page 119: Descrizione Del Sistema: Vista Anteriore, Sinistra E Destra

    Descrizione del sistema: Vista anteriore, sinistra e destra Lato anteriore Lato sinistro Lato destro  Figura 5 - Vista anteriore, sinistra e destra 1. Indicatori LED 7. Porta USB 3.1 Gen 2 Tipo-C *Supporto adattatore di alimentazione per porta Thunderbolt 2.
  • Page 120: Descrizione Del Sistema: Vista Inferiore E Posteriore

    Descrizione del sistema: Vista inferiore e posteriore Figura 6 Vista inferiore e posteriore 1. Ventola 2. Altoparlanti incorporati  Surriscaldamento Per prevenire il surriscaldamento del computer, accertarsi che non vi sia nulla che ostruisca la (le) ventola (ventole) du- rante l’uso del computer. Avviso di rimozione coperchio inferiore Non rimuovere il/i coperchio/i e/o vite/viti...
  • Page 121: Control Center

    Control Center Premere la combinazione di tasti Fn + Esc oppure fare doppio clic sull'icona nell'area di notifica della barra delle applicazioni per attivare/disattivare il Control Center. Il Control Center consente di accedere rapidamente ai controlli utilizzati più frequentemente, e di attivare/disattivare velocemente il touchpad/il modulo camera del computer. Menu del Control Center Il Control Center contiene due titoli di menu (Impostazioni di base e Impostazioni extra).
  • Page 122: Modalità Risparmio Energia

    Modalità risparmio energia Stato di alimentazione (Impostazioni di ba- È possibile impostare una Modalità risparmio energia L'icona Stato di alimentazione viene visualizzata se facendo clic sull'icona corrispondente nel centro del Control attualmente il computer è alimentatore con la batteria, Center. Ogni modalità di alimentazione influirà sulla oppure mediante l'alimentatore collegato in una presa modalità...
  • Page 123 Velocità ventola (Impostazioni di base) Da questa voce di menu è possibile impostare la velocità della ventola su Massimo (potenza massima) o Automatico. La velocità della ventola si regola automaticamente per controllare il calore della CPU. Puoi usare il cursore Offset per regolare le impostazioni in base alle tue preferenze.
  • Page 124: Led Di Retroilluminaziona Della Tastiera

    LED di retroilluminaziona della tastiera Premere Fn + tasto per attivare/disattivare il LED della tastiera. È Combinazione tasti funzione LED tastiera possibile configurare il LED della tastiera utilizzando Fn + Avviare l'applicazione di retroillumina- combinazione di tasti secondo quanto riportato nella Tabella È...
  • Page 125: Menu Start, Menu Contestuale, Barra Delle Applicazioni, Pannello Di Controllo E Impostazioni Di Windows 10

    Menu Start, Menu contestuale, Barra delle applicazioni, Pannello di controllo e Impostazioni di Windows 10 La maggioranza delle app, pannelli di controllo, utilità e programmi all’interno di Windows 10 sono accessibili dal menu Start cliccando l’icona nella barra delle applicazioni nell’angolo inferiore sinistro dello schermo (oppure premendo il Tasto logo Windows sulla tastiera).
  • Page 126: Funzioni Video

    Funzioni video Dispositivi di visualizzazione Si prega di notare che è possibile usare display esterni Il sistema è dotato di una GPU integrata Intel. È possibile connessi alle porte uscita HDMI e/o Mini DisplayPort. selezionare i dispositivi di visualizzazione e configurare le Vedere il manuale del display per vedere i formati supportati.
  • Page 127: Funzionalità Audio

    Funzionalità audio Opzioni risparmio energia È possibile configurare le opzioni audio del computer dal Il pannello di controllo delle Opzioni risparmio energia pannello di controllo Audio di Windows. (menu Hardware e suoni) di Windows consente la configurazione delle funzioni di risparmio energetico del Il volume può...
  • Page 128: Installazione Driver

    Installazione driver  Il disco Device Drivers & Utilities + User’s Manual contiene i driver e le utilità necessari per il corretto funzionamento del computer. Inserire il disco e fare clic su Install Drivers Linee guida generali per (pulsante), oppure il pulsante Option Drivers per accedere al menu del driver opzionale. l'installazione dei driver Installare i driver attenendosi all'ordine indicato nella Figura...
  • Page 129: Camera Windows Hello (Opzione)

    Camera Windows Hello (Opzione) 9. Guarda direttamente allo schermo e il sistema effettuerà la scansione della tua faccia (la barra blu sotto la tua immagine La camera Windows Hello è compatibile con il sistema di indica la progressione della scansione). Riconoscimento del volto Windows Hello.
  • Page 130: Lettore D'impronte Digitali (Opzione)

    Lettore d’impronte digitali Configurazione modulo impronte digitali 1. Fare clic sull’elemento Impostazioni nel menu Start. (Opzione) 2. Fare clic su Account e fare clic su Opzioni di accesso. Registrare le proprie impronte seguendo le istruzioni seguen- 3. Sarà necessario aggiungere una password di Windows (cliccare su Aggiungi sotto Password).
  • Page 131: Tpm (Opzione)

    TPM (Opzione) 3. Fare clic su Amministrazione TPM. Figura 15 Prima di configurare le funzioni TPM (Trusted Platform Crittografia unità Module) è necessario inizializzare la piattaforma di sicurezza. BitLocker (Amministrazione Attivazione di TPM TPM) 1. Riavviare il computer. 4. La finestra di gestione TPM vi consente di configurare il TPM 2.
  • Page 132: Risoluzione Dei Problemi

    Risoluzione dei problemi Problema Possibile causa - Soluzione Non è possibile rilevare i moduli I moduli sono disattivati quando il computer si trova nella modalità aereo. Controllare il LED LAN Wireless e Bluetooth. indicatore per vedere se il computer è in modalità aereo (vedere la Tabella 1 a pagina 112).
  • Page 133: Specifiche Tecniche

    Specifiche tecniche BIOS Tastiera Insyde BIOS (SPI Flash ROM da 128Mb) Tastiera full size (con tastierino numerico  integrato) Memoria Ultimi aggiornamenti delle Dual Channel DDR4 (Opzione di fabbrica) Tastiera full size specifiche tecniche illuminata multicolore (con tastierino Due prese SODIMM 260 pin Le specifiche tecniche elencate in que- numerico integrato) Supporto per moduli di memoria DDR4...
  • Page 134 Comunicazione Interfaccia Requisiti ambientali 10/100/1000MB Base-TX Ethernet LAN Una porta USB 3.1 Gen 2 Tipo-C* Temperatura ° ° integrato *La quantità massima di corrente fornita da In esercizio: 5 C - 35 ° ° Modulo di camera 1,0 HD porte USB Tipo-C è 500mA (USB 2.0)/ Non in esercizio: -20 C - 60 1500mA (USB 3.1).

Table des Matières