Operation; Checking The Battery Capacity; Cold Weather Operation - GreenWorks ELITE L-300 Guide D'utilisation

OPERATION

CHECKING THE BATTERY CAPACITY

Note: The battery is not shipped fully charged. It is recommended to fully charge before first use
to ensure that maximum run time can be achieved. This lithium-ion battery will not develop a
memory and may be charged at any time.
Press the battery capacity indicator (BCI) button. The green lights will illuminate according to the
batteries capacity level and the blue light indicates bluetooth function. See chart below:
BATTERY CAPACITY
INDICATOR (BCI)
BUTTON
Lights
3 Green Lights
2 Green Lights
1 Solid Green Light
1 Blinking Green Light The battery is between 15% and 30% capacity
Green Lights go out
Note: After press the indicator button, the bluetooth light will flash blue about 30 seconds. If the
battery pack has been connected with the app, the blue light will be always bright.
BATTERY PROTECTION FEATURES
GW ELITE 40V lithium-ion battery packs are designed with features that protect the lithium-ion
cells and maximize battery life.
If the tool stops during use, release the trigger to reset and resume operation. If the tool still does
not work, the battery needs to be recharged.

COLD WEATHER OPERATION

The lithium-ion battery pack can be used in temperatures down to -14°C (6.8°F). Put the battery
pack on a tool and use the tool in a light duty application. After about a minute, the pack will
warm up and begin operating normally.
CAPACITY LIGHT METER
Capacity
The battery is more than 80% capacity
The battery is between 55% and 80% capacity
The battery is between 30% and 55% capacity
The battery is under 15% capacity and requires
charging immediately
7
BLUETOOTH
LIGHT METER