essentiel b ECHB 933n Notice D'utilisation page 14

LED display and control panel description
Heating indicator
Timer
Power indicator
Control panel and remote control description
26
V.3.0
your product
Temperature indicator
Connection indicator
Childproof lock indicator
Time indicator
On/Off Button
Mode Button
Temperature increase
Temperature drop
Timer
use
Safety precautions
Remove any film or stickers before using this appliance.
•
Make sure the appliance is standing on a flat and stable surface.
•
CAUTION: there must be more than one metre between the radiator and a wall or any
•
other object such as curtains, a sofa, etc.
Warning: Never cover or place any type of object on the radiator when in operation.
Check that the appliance's voltage matches the mains voltage (230 volt wall socket).
•
This radiator contains oil and takes a long time to cool down after being switched off.
•
Be careful not to burn yourself! After the appliance has been switched off, allow it to
cool down completely before moving it; to move it, use the handle.
Thermal safety:
In the event of overheating, a safety device automatically switches off the appliance. In this case, unplug
the appliance from the power socket and plug it back in once it has cooled down. If your appliance still
does not work, take it to your retailer's customer service department to be inspected and repaired. The
user may not perform any repairs.
Anti-tilt safety device:
The appliance is equipped with a safety cut-out system, which automatically switches off the appliance
if it is tilted.
First use
Your appliance may give off a mild odour when switched on for the first time. This is normal.
This odour will only be temporary and will dissipate quickly.
To use the remote control, you need 2 AAA batteries (batteries not included with the product).
Use
1) Plug your appliance into a wall socket.
2) Press the switch.
The appliance beeps and the indicator lights up on the LED display.
3) Press the button, the appliance beeps and the LED display lights up.
Setting the temperatures:
Press the and buttons to increase or decrease the desired temperature.
You can press and hold down the buttons to quickly scroll through the temperature.
The display flashes during selection. Once the temperature has been selected, the display becomes
fixed.
27
V.3.0
use