Information Codes - Samsung DW80K7050 Série Manuel D'utilisation

troubleshooting

INFORMATION CODES

The Control Panel displays information codes to help you understand what is occurring with your
dishwasher.
Code
Over-level water check
•
OC
Leakage check
•
LC
Water supply check
•
4C
Drain check
•
5C
High temperature heating check
•
HC
Pump operation check
•
3C
For any codes not listed above, call 1-800-SAMSUNG (726-7864)
Functional check. Close the water supply valve and go to your house circuit
breaker panel, set the dishwasher's circuit breaker switch to o , and then
contact an authorized Samsung service center.
If a water supply valve connection leak occurs, close the water supply valve
and go to your house circuit breaker panel, set the dishwasher's circuit breaker
switch to o , and then contact the installer to fi x.
If the problem continues, contact an authorized Samsung service center.
Check if the water supply valve is closed, the water supply is suspended, or the
water inlet valve or line is frozen or clogged by foreign particles.
If the problem continues, close the water supply valve, and then contact an
authorized Samsung service center.
After closing the water supply valve, check whether the drain hose is clogged or
folded. Also, check whether drain hole inside sump is clogged.
If the problem continues, contact an authorized Samsung service center.
The product ensure that the temperature for hot water line is not too high and
adjusts to appropriate temperature (120 ˚F (49 ˚C) - 149 ˚F (65 ˚C)) automatically.
If the problem continues, go to your house circuit breaker panel, set the
dishwasher's circuit breaker switch to o , and then contact an authorized
Samsung service center.
Functional check. Turn o the dishwasher and try to start it again.
If the problem continues, contact an authorized Samsung service center.
English - 30
Action