Publicité
Les langues disponibles
Les langues disponibles
The symbol
with the highest temperature, however the other
metallic or non-metallic surfaces can also
become very hot during use and it is therefore
advisable to always handle them with care and if
possible with the help of isothermal gloves or
other thermal protection. In case of doubt
concerning the temperature of a certain surface it
is always preferable to protect oneself.
(*) Competent qualified electrician: after-sales
department of the producer or importer or any
person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all
danger. In case of need you should return the
appliance to this electrician (www.ggv-service.de).
BEFORE THE FIRST USE
Before using the appliance for the first time, make sure the 4 feet are fitted correctly
underneath the appliance. Never use the appliance if the feet are not fitted correctly as this
would damage the appliance and the work surface underneath the appliance.
USE
First check that the voltage marked on the product is the same as your supply voltage.
Select a suitable position close to an electric socket, on a dry and even surface.
Make sure the controls are in the OFF position (0). Plug in.
The invisible protective coating must be removed before you can use the appliance. To
do this, set the controls to the maximum setting and leave switched on for approximately
10 minutes. Smoke will develop, make sure that the room is ventilated. Switch off the
cooking plates and allow to cool down completely. The cooking plates are now ready for
use.
Always use flat-bottomed saucepans, which make good contact with the cooking plates.
The saucepan bases should ideally be of the same size as the cooking plates.
Select the temperature. The cooking plates have a range of temperatures.
Due to the cooking plates' construction, residual heat will remain after switching off. This
may be used to keep food warm for a short period.
After use, turn the temperature dials to "
outlet.
is always put on the surface
0
" and unplug the appliance from the electrical
13
Publicité
