Installation - JVC LT-24HD7WU Mode D'emploi

Installation

Front panel
1: Remote Control Sensor.
2: Power Indicator LED:
RED STANDBY.
3: Side buttons
REAR AV Connections
COAXIAL OUTPUT
All the terminals are (from left to right): YPbPr INPUT, VIDEO, AUDIO INPUT,COAXIAL OUTPUT, SCART.
Note: VIDEO and YPbPr share one audio channel.
REAR AV Connections(SIDE)
All the terminals are(from left to right):
USB, HDMI2(ARC), HDMI1, HEADPHONE, CI, PC AUDIO, VGA, RF.
Note: 1.When HDMI port gets DVI signal ,the audio signal is received from the PC Audio channel.
2.Insert the plug of the earphone into the headphone jack on the unit.
The speakers are then muted.
HDMI ARC (Audio Return Channel)
The ARC function allows you to send audio signal from your ARC-compliant TV to ARC-compliant
audio devices (e.g. home theatre) without the need to connect any audio cable (e.g. coaxial, optical
digital audio cable, or analog audio cable).
To enjoy the ARC function:
1. Make sure your ARC- compliant audio devices are connected by an HDMI 1.4 cable to the HDMI 2 (ARC)
port of your ARC- compliant TV. And open the ARC function of ARC-compliant audio devices.
2. Adjust TV setting : press MENU button, choose SETUP, then set HDMI CEC Control on.
3. Then, just use your TV remote control to adjust the volume output (VOL + / - and MUTE) of the
connected audio device.
Note: If the ARC-compliant audio devices do not support sound that TV outputs, such as Dolby
Digital , or Dolby Digital Plus, then ARC function will not work and there may be no sound from
ARC-compliant audio devices. In this case, please set coaxial to PCM.
KEYBOARD
3
1
2
1. OPEN/CLOSE: Open or close DVD slot.
2. PLAY/PAUSE: Play or pause playback.
3. SOURCE: Displays the input source, press "CH+"or
"CH-"to select required source,then press "VOL-" or
30 30
"VOL+" to change source.
4. MENU: Display main MENU.
5. CH+/CH-: In TV mode, press "CH+" or "CH-" to
FREEZE
change the channel up and down. In MENU mode,
press "CH+" or "CH-" to select items.
EPG
6. VOL+/VOL-: Adjust sound level. In MENU mode,
VOL CH
press "VOL+ " or "VOL- " to adjust the item that you
selected.
7. STANDBY: Press this button to turn the unit ON
from STANDBY mode. Press it again to turn the set
back to STANDBY.
OPEN/CLOSE
PLAY/PAUSE
SOURCE
MENU
CH+
CH-
VOL+
VOL-
STANDBY
EN
9