Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
E06: Motor Abnormality
E08:
Control
Abnormality
E10: Motor Abnormality
NOTE: If you are unable to resolve an issue using the troubleshooting guide above, please
contact Customer Service at support@sunnyhealthfitness.com
The motor wire is not
connected, or the motor is
damaged.
Board
The control board is not
connected.
The motor is damaged, or
a
moving
treadmill
is
therefore
the
unable to rotate properly.
Check motor wires to see if
the motor is connected. If the
wire has been punctured or
damaged, you will need to
replace it. If the problem is not
rectified, you may need to
replace the motor.
Check the upper and middle
wires to see if the control
board is connected. If the wire
has
damaged, you will need to
replace it. If the problem is
not rectified, you may need to
replace the control board.
Inspect moving parts of the
part
of
the
treadmill to ensure that they
stuck
and
are operating correctly.
motor
is
Replace
necessary.
27
been
punctured
the
motor
Version 1.5
or
if
Publicité
Table des Matières
