Moving Parts; Setting Up And Connecting To The Power Supply; Items Supplied And Transport Inspection - UNITED OFFICE ULG 350 B1 Mode D'emploi

Never perform hot lamination on flammable, heat-sensitive
■
and/or meltable materials and do not laminate drawings on
temperature-sensitive paper or material that will undergo
changes in colour or quality when subjected to heat .
Never laminate valuable or unique documents . Although the
■
appliance complies with all current safety norms/standards,
malfunctions can never be completely ruled out . Malfunctions
with the laminator can result in damage to the document
being laminated .
The device is suitable for indoor use only .
■
WARNING – RISK OF INJURY!

Setting up and connecting to the power supply

Items supplied and transport inspection

The appliance is delivered with the following components as standard:
▯ Laminator ULG 350 B1
▯ 10 x Laminating pouches DIN A4 for hot laminating (80 micron)
▯ 10 x Laminating pouches DIN A5 for hot laminating (80 micron)
▯ 10 x Laminating pouches for hot lamination of business cards (80 micron)
▯ This operating manual
NOTICE
► Check the contents to make sure everything is present and for signs of visible
damage .
► If the contents are not complete or are damaged due to defective packaging
or through transportation, contact the Service Hotline (see chapter Service) .
■ 4 │ GB │ IE

Moving parts

Keep body parts away from moving parts .
There is risk of crushing injuries!
ULG 350 B1