Oehlbach SCOPE VISION Mode D'emploi page 8

Connecting the Scope Vision directly to your TV
1. Make sure that the TV is switched off.
2. Connect the coaxial cable of the Scope Vision to the
antenna connection on your TV.
3. Plug the mains adapter for the amplifier into a power outlet.
4. You can now switch on your TV and search for stations.
Connecting the Scope Vision to a set-top box
1. Make sure that the set-top box is switched off.
2. Connect the coaxial cable of the Scope Vision to theantenna connection on your set-top box.
3. Plug the mains adapter for the amplifier into a power outlet.
4. Follow the instructions in the user manual supplied with your set-top box.
5. You can now use your set-top box and search for stations.
Phone
Power
Volume
8