emerio CFH-212922.1 Mode D'emploi page 6

CONTROL PANEL
1. On/off button
2. Swing button
3. Feel mode button
4. Sleep mode button
5. Timer button
6. Speed decrement button
7. Speed increment button
8. Sleep mode indicator icon
9. Feel mode indicator icon
10. Swing indicator icon
11. Digital display for speed
12. Digital display for timer
LOCATING YOUR APPLIANCE
- The fan must always be placed on a flat stable surface.
- Do not locate the fan where furniture or other objects can obstruct the air flow.
ASSEMBLING INSTRUCTIONS
** Please assemble correctly by the following order when using.
Stand assembly
1. Loosen the four screws from the base. (fig.1)
2. Loosen the locking bolt (a), ring washer (b) and washer plate (c) from the bottom of the standing shaft. (fig.2)
3. Attach the standing shaft onto the base and fix firmly with the four screws. Tighten back the locking bolt,
ring washer and washer plate to the bottom of the standing shaft. (fig.3)
4. Loosen the height adjustment knob (d) and the three screws (e) at the bottom of the height adjustment pipe.
Remove the height adjustment pipe out of the standing shaft. (fig.4)
5. Put the decorative cap (f) on the base through the standing shaft. (fig.5)
6. Insert back the height adjustment pipe and fix with the three screws. Pull the pipe to your desired height
and fix with the height adjustment knob.
fig.1 fig.2 fig.3
- 5 -
fig.4 fig.5