Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
Please press the buttons on the control panel or the buttons on the remote control to choose your desired
functions. Plug in the appliance.
1. On/off button:
Press the on/off button to turn on the unit. The unit starts to work at speed 3. Press the button again, the
unit will be turned off.
2. Speed button:
Press the speed button "
digital display.
3. Timer button:
Press the timer button to set your desired working time (1-9h). Once the timer is set, the corresponding time
value will start to blink on the digital display. The unit will be turned off automatically when the pre-set time
is reached. To cancel the timer, press and hold the timer button on the control panel until the time value on
the digital display disappear.
Note: This function can only be used by using the control panel. Remote control has no timer button.
4. Swing button:
Press the swing button to turn on the oscillation function. The fan head will oscillate horizontally at an angle
of 80 degree from left to right. Press the button again to turn off the function.
5. Sleep mode button:
Press the button to enter the sleep mode. The fan will be set to run at a quieter and lower speed setting.
The wind speed is in default and not to be adjusted manually. If you adjust the wind speed manually, the fan
will exit the sleep mode.
6. Feel mode:
Press the button to enter the feel mode. The fan will vary the wind speed randomly, giving the effect of
natural breeze. The wind speed is in default and not to be adjusted manually. If you adjust the wind speed
manually, the fan will exit the feel mode.
Note: This function can only be used by using the control panel. Remote control has no feel button.
NOTE: The appliance will keep working with the previous wind speed and swing function once turned on again
without being unplugged. If the appliance has been disconnected before, it will begin to work at speed 3 once
turned on again.
CLEANING AND MAINTENANCE
1.
Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains cable
from the socket.
2.
Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and dry it carefully. Always take out the mains plug first.
3.
Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it occasionally
using a dry brush or vacuum cleaner.
4.
Avoid the use of gasoline, benzene, thinner, etc. as they may result in damage to the appliance.
5.
Store the appliance in a clean dry place when not in use.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50Hz
Power consumption: 130W
Air flow: 250m³ /min
Frequency Range: 433.92MHz, Single Channel
" / "
" to set your desired wind speed 1 / 2 / 3 / 4 / 5 / 6, indicated on the
- 10 -
Publicité
Table des Matières
