Cleaning And Care; Technical Data; Power Adapter - Renkforce 1490972 Mode D'emploi

Cleaning and care

• Unplug this product before cleaning the power supply and the connected devices.
• Under no circumstances use aggressive cleanings agents, cleaning alcohol or other chemical
solutions since these can penetrate the housing or impair functionality.
• Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.

Technical data

a) SATA adapter
Input voltage ................................. 5 V/DC via USB (min. USB 2.0),
12 V/DC via power adapter
Input current ................................. max. 2 A
USB standard ............................... USB 3.0 (downward compatible to USB 2.0/1.1)
Transfer rate ................................. max. 5 GBit/s
Compatible with ............................ 2.5" / 6.35 cm and 3.5" / 8.89 cm hard disk, SATA 1, 2, 3,
supports CD/DVD drive
Supported address mode ............. ATA/ATAPI LBA 48
Hard disk capacity ........................ max. 3 TB
Cable length ................................. 30 cm
System requirements .................... Windows
Vista™ (32/64 bit), 7 (32/64 bit), 8.0, 8.1 (32/64 bit),
10 (32/64 bit), RT
Operating conditions ..................... -10 to +50 °C, 20 – 90 % RH
Storage conditions ........................ -20 to +70 °C, 20 – 90 % RH
Dimensions (W x H x D) ............... 68 x 17 x 61 mm
Weight .......................................... 40 g
b) Power adapter
Input voltage / current ................... 100 - 240 V/AC, 50/60 Hz, 0.8 A
Output voltage / current ................ 12 V/DC, 2 A
Cable length ................................. approx. 138 cm
XP SP1, SP2, SP3 (only 32 bit),
®
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE. *1490972_V1_0916_02_hk_m_en